Logging 2byte Load with EvoScan & 96530706 Question
#1
Logging 2byte Load with EvoScan & 96530706 Question
I'm hitting Load over 260, so I figured it was time to use 2byte. Well my 2byte load numbers are wayy different numbers. Almost like +100. I am using Tephra v7 96530706 and my 2byte to 1 byte load factor is set at the regular setting of 1.2.
Here is a screen of my Load on a map, 2byte to 1 byte load factor and my MUT Table. I'm not sure if my MUT table is correct but I thought it should be..
Here is a screen of my Load on a map, 2byte to 1 byte load factor and my MUT Table. I'm not sure if my MUT table is correct but I thought it should be..
#2
Evolving Member
all I can tell you is that I recently switch to everything-2byte on my tephra v7 and really there's no reason to use load2byte and rpm2byte unless you hit crazy figures
numbers are nearly the same than load1byte (at least up to the 288 I saw) and the regular rpms really (up to 8100rpm)
the only useful one for me is 2byte airflow...BUT and that's a big one...as soon as I enable 2byte my power goes down by 10-20hp dynojet...don't ask me why or how, afrs are the same, boost and load too, the end result just isn't I've switched back and forth maybe 15 times...always the same results (and I've tried lots of maf scaling curves)..sometimes changing things too much doesn't work that well at leats on my car
evo9 fpgreen
numbers are nearly the same than load1byte (at least up to the 288 I saw) and the regular rpms really (up to 8100rpm)
the only useful one for me is 2byte airflow...BUT and that's a big one...as soon as I enable 2byte my power goes down by 10-20hp dynojet...don't ask me why or how, afrs are the same, boost and load too, the end result just isn't I've switched back and forth maybe 15 times...always the same results (and I've tried lots of maf scaling curves)..sometimes changing things too much doesn't work that well at leats on my car
evo9 fpgreen
Last edited by Kakihara; Jun 21, 2013 at 12:41 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Fast_Freddie
ECU Flash
4
Apr 16, 2011 05:15 AM