IAT Correction table & Live VE Mapping?
Aug 10, 2013, 04:34 PM
#1
IAT Correction table & Live VE Mapping?
Two questions:
1. I am not sure if this has anything to do with me running full open loop but when my intake temps go above like 76-77ish the car starts to lean out. Is there a IAT correction table that i can adjust to compensate fuel for higher IATs? I looked through the tables in my ROM and nothing jumps out at me. My guess is there must be some sort of trim adjustment that I need to adjust.
2. Is it possible to use live map tracer for a 3D VE table. I don't see it as an option. Not sure if there is something I need to enable or patch to get that to work.
1. I am not sure if this has anything to do with me running full open loop but when my intake temps go above like 76-77ish the car starts to lean out. Is there a IAT correction table that i can adjust to compensate fuel for higher IATs? I looked through the tables in my ROM and nothing jumps out at me. My guess is there must be some sort of trim adjustment that I need to adjust.
2. Is it possible to use live map tracer for a 3D VE table. I don't see it as an option. Not sure if there is something I need to enable or patch to get that to work.
Aug 11, 2013, 05:47 AM
#2
Rename your kpa /map log entry something like map load or kpa load and then you can select that as your x axis.
I've never noticed leaning out and I have no idea of iat vs fuel enrichment
Only iat vs ign trim
I've never noticed leaning out and I have no idea of iat vs fuel enrichment
Only iat vs ign trim
Last edited by 211Ratsbud; Aug 11, 2013 at 05:57 AM.
Thread
Thread Starter
Forum
Replies
Last Post
2fast2evo
General Engine Management / Tuning Forum
2
Oct 19, 2014 02:35 PM
06Black
Evo Engine / Turbo / Drivetrain
6
Mar 8, 2011 08:48 PM
richardjh
09+ Ralliart Engine/Turbo/Drivetrain
2
Nov 9, 2010 05:08 PM