Nlts rpm drop
Sep 1, 2013, 11:53 AM
#1
Evolved Member
Thread Starter
iTrader: (5)
Join Date: Mar 2007
Location: Rockland
Posts: 839
Likes: 0
Received 0 Likes
on
0 Posts
Nlts rpm drop
What rpm does nlts use to subtract rpm drop from the main rev limiter or the stationary rev limited?reason I want to know is that I want to test at a lower rpm
Sep 1, 2013, 12:09 PM
#2
If you are over the engagement load and speed then NLTS will drop the rpm wherever you push in the clutch. So whether your at 4k or 8k rpm and you push in the clutch it will drop the amount you put into rpm drop.
You can test it by setting load and speed to 0 and just rev the engine and push in the clutch and make sure the rpm drops.
You can test it by setting load and speed to 0 and just rev the engine and push in the clutch and make sure the rpm drops.
Sep 1, 2013, 04:54 PM
#4
Evolved Member
Thread Starter
iTrader: (5)
Join Date: Mar 2007
Location: Rockland
Posts: 839
Likes: 0
Received 0 Likes
on
0 Posts
If you are over the engagement load and speed then NLTS will drop the rpm wherever you push in the clutch. So whether your at 4k or 8k rpm and you push in the clutch it will drop the amount you put into rpm drop.
You can test it by setting load and speed to 0 and just rev the engine and push in the clutch and make sure the rpm drops.
You can test it by setting load and speed to 0 and just rev the engine and push in the clutch and make sure the rpm drops.
Sep 1, 2013, 05:01 PM
#5
Newbie
Join Date: Mar 2013
Location: Luxembourg
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
And this way you will also see if your clutch switch does troubles.
Had 1 switch on EVO IX death...and was searching 2 days why NLS didnt work properly
Trending Topics
Sep 1, 2013, 05:49 PM
#9
Evolved Member
Thread Starter
iTrader: (5)
Join Date: Mar 2007
Location: Rockland
Posts: 839
Likes: 0
Received 0 Likes
on
0 Posts
Not working maybe switch is bad or i copied wrong onto my rom mettadata file.If the mod is copied properly it wont be grayed out in ecuflash correct?
Sep 14, 2016, 02:20 AM
#14
Hey guys I figured I'd bump this old thread vs making a new one.
I just enabled my nlts and set the rpm drop to 1200 to start with.
I feel like I could go much lower, what do most set the rpm drop to on a 5spd ?
My previous vehicle had a n2mb nlts box so it was set off a timer instead of rpm.
I just enabled my nlts and set the rpm drop to 1200 to start with.
I feel like I could go much lower, what do most set the rpm drop to on a 5spd ?
My previous vehicle had a n2mb nlts box so it was set off a timer instead of rpm.
Thread
Thread Starter
Forum
Replies
Last Post
maxspeed96ct
General Engine Management / Tuning Forum
0
Sep 4, 2016 05:50 AM