TSTARKZ123

iTrader: (7)

Hey all,

I've recently changed turbo setups on my car. Unfortunately, the way my setup is now oriented in a fashion that doesn't allow me to utilize my MAF to bring my car to a tuner. Would any be able to convert my current tune to SD so that I can start the car, test for leaks/issues and drive (minimal to no boost) to the tuner? Your help would be greatly appreciated.

90zcrex

iTrader: (11)

What turbo and map sensor?

TSTARKZ123

iTrader: (7)

The tune was done with a omni 4bar and a gt30 turbo (if I remember correctly for the turbo)

90zcrex

iTrader: (11)

Here ya go, should get you to the tuner, just keep it out of boost to be safe.

Edit, use rom in later post.

TSTARKZ123

iTrader: (7)

Thanks a bunch!

domyz

iTrader: (6)

And you should tell him he can cook sausages with this timing map. (backfire timing)

90zcrex

iTrader: (11)

lol

Biggy VIII

Is that an SD ROM? It's internal ID is 88590715 - thats a MAF ROM actually... And the XML that you gave is 88592715.

or am I missing something?

domyz

iTrader: (6)

You're right ahah. But which map sensor you have?



This is for JDM Map sensor:
USDM Evo IX Option 3

90zcrex

iTrader: (11)

oops, yes you are right, here it is. Thanks

TSTARKZ123

iTrader: (7)

Thanks for the updated file. Had to rework some piping but drove the car ~30ish miles with no issues to the my buddy that's changing around somethings for me. I'll ensure to update the file when its time to start the car again and drive to the actual tuner.