KOOLER

Gentlemen,

is default 100 a good one to keep? I've been driving with this setting set to 200 but car overboosts. Going back to 100 makes car a bit laggy... What value do you run?

thanks!

Anton

Raptord

iTrader: (10)

I leave it disabled as it affects part-throttle driveability, and on a road-course that's not something I want.

The value that works for you will depend on what your peak boost is. 160-170ish should be a decent starting point if 200 makes you overboost.

See the boost guide in my sig for more info on this table.

domyz

iTrader: (6)

Speaking about this table it'd be really nice to have it activated only over a TPS threshold. But ECU development is quite dead on CT9A, AFAIK

jedibow

iTrader: (1)

Log your load variable then set the value to 10 lower than the load your car sees after the wastage opens in first gear.