RedNBlck

Just put an evo 8 ECU in my evo 4. The car has been converted to sd. So i flashed the car with tephra v7 and the car doesn't start. It'll crank and try to start but it won't actually fire. I was wondering what are all the table that need to be touched when converting to sd in order for the car to start and drive. Thank yall for your time.

Evilution226

Just make sure everything is reconnected in the engine bay. Wires tight in connectors and splices are clean end tight. I will check mine for you.

1fast97gsx

iTrader: (-1)

Did you turn off the immobilizer?

jeffbeagley

Either immobilizer or Crank Sensor.

RedNBlck

I can post the bin when I get home if that helps.

RedNBlck

Here is the hex file I flashed the car with. ROM ID 94170015

todd6027

iTrader: (10)

thats not an sd rom you need 94171715 second post here

http://api.viglink.com/api/click?for...hramod-v7.html
then you need to disable the immobiliser in faa bits then change immo hex to 0040