Flex Fuel testing in TephraXMOD V3
#196
#197
good news.
2012 USDM GSR (58010005) and 2009 USDM RA (53600010) are in the final stages of testing.. so they will be up soon..
2010 USDM GSR (55570006) is also ready for testing...
today i'm going to try and get 56920008 going as well but for now i need a rest, my brain hurts
2012 USDM GSR (58010005) and 2009 USDM RA (53600010) are in the final stages of testing.. so they will be up soon..
2010 USDM GSR (55570006) is also ready for testing...
today i'm going to try and get 56920008 going as well but for now i need a rest, my brain hurts
#199
56920008 (AUDM EvoX MR) is almost ready, got a few peeps running it atm..
still waiting on feedback for 2012 USDM GSR... and the other roms under testing on www.tephra.it/v3
up next is 2008 USDM MR, should have it done this weekend..
still waiting on feedback for 2012 USDM GSR... and the other roms under testing on www.tephra.it/v3
up next is 2008 USDM MR, should have it done this weekend..
#200
Evolving Member
Join Date: Feb 2008
Location: Ottawa Canada
Posts: 202
Likes: 0
Received 0 Likes
on
0 Posts
I have several in test at the moment (see www.tephra.it/v3 for info).
I will be adding USDM 2008-2009 MR (52690022), and some JDM ROM, but i'm not exactly sure which one because for some reason JDM ROMID's confuse me
otherwise I am taking requests for ROM's...
I will be adding USDM 2008-2009 MR (52690022), and some JDM ROM, but i'm not exactly sure which one because for some reason JDM ROMID's confuse me
otherwise I am taking requests for ROM's...
#201
#203
EvoM Guru
iTrader: (8)
The following users liked this post:
quatts (May 26, 2016)
#206
Evolved Member
iTrader: (36)
https://www.evolutionm.net/forums/ev...-bolt-ons.html
Well I got my 2008 Evo X GSR all set up this weekend on the new TephraV3 Flex Fuel rom with help from Tony at UMS Tuning. This is by far the best thing I've done to the car. Thank you Tephra for taking the time to develop this.
Well I got my 2008 Evo X GSR all set up this weekend on the new TephraV3 Flex Fuel rom with help from Tony at UMS Tuning. This is by far the best thing I've done to the car. Thank you Tephra for taking the time to develop this.
#207
Evolved Member
iTrader: (36)
Quick question for you all who are running this. I just recently had my 2008 Evo X GSR set up with the new flex fuel rom. On cold start when I turn the car over the "check engine light" flashes fast 8 or so times then goes away and doesn't come back on. Is this the car knocking or is something else? I then let the car idle and warm up then turned the car off for about 30 seconds. I then turned the car back on and it started right up without any flashing lights. Curious if any of you have some insight. Thanks so much.
#208
EvoM Guru
iTrader: (8)
Quick question for you all who are running this. I just recently had my 2008 Evo X GSR set up with the new flex fuel rom. On cold start when I turn the car over the "check engine light" flashes fast 8 or so times then goes away and doesn't come back on. Is this the car knocking or is something else? I then let the car idle and warm up then turned the car off for about 30 seconds. I then turned the car back on and it started right up without any flashing lights. Curious if any of you have some insight. Thanks so much.
Yup, that is part of the ROM safety to tell you if the average E% deviates too much from the RAW sensor signal too much. It usually happens on start up after filling up or after a cold start because there isn't fuel in the sensor yet.
Totally normal on startup sometimes.
Check out more info under "Step 4: Advanced Options" here: http://www.tephra.it/v3/
#209
Evolved Member
iTrader: (36)
Replied to your PM but I'll put it here as well to help others that might also have the same question...
Yup, that is part of the ROM safety to tell you if the average E% deviates too much from the RAW sensor signal too much. It usually happens on start up after filling up or after a cold start because there isn't fuel in the sensor yet.
Totally normal on startup sometimes.
Check out more info under "Step 4: Advanced Options" here: http://www.tephra.it/v3/
Yup, that is part of the ROM safety to tell you if the average E% deviates too much from the RAW sensor signal too much. It usually happens on start up after filling up or after a cold start because there isn't fuel in the sensor yet.
Totally normal on startup sometimes.
Check out more info under "Step 4: Advanced Options" here: http://www.tephra.it/v3/