Dual map and ecuflash
#1
Newbie
Thread Starter
Join Date: Jun 2015
Location: Switzerland
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
EvoScan Knock Sun
Hi everyone
After remap my car by a pro wich use ecutek i read my ECU with ecuflash and i saw that he dosen't disable a few things
so if i disable this things and remap the car with ecuflash i will steel have my dual map?
thank's
After remap my car by a pro wich use ecutek i read my ECU with ecuflash and i saw that he dosen't disable a few things
so if i disable this things and remap the car with ecuflash i will steel have my dual map?
thank's
Last edited by PauloPinho; Oct 11, 2016 at 01:38 PM.
#4
Newbie
Thread Starter
Join Date: Jun 2015
Location: Switzerland
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
with TephraMod V7 i found all maps and the differences between both are pretty cool
if i use this method i disable the egr in both maps?
thanks
if i use this method i disable the egr in both maps?
In the ECU:
-XXX- See Mr Fred Quote Below, might be good anyway- Change Periphery 0 (FAA) bit 11 to 1 (to disable EGR Timing advance)
-XXX- Not necessary if disabled correctly - Change Periphery 2 (FCA) bit 09 to 0 (to disable P0401 EGR Test)
-XXX- Unrelated, but a good change for anyone with problems - Change periphery 4 (FEA) bit 14 to 1 (to disable MAP vs Baro test on startup - not necessary but doesn't hurt)
For emissions:
Update your OBDII tables to report "passed" for the EGR test. I will allow you to find this elsewhere.
https://www.evolutionm.net/forums/no...refer-mac.html
-XXX- See Mr Fred Quote Below, might be good anyway- Change Periphery 0 (FAA) bit 11 to 1 (to disable EGR Timing advance)
-XXX- Not necessary if disabled correctly - Change Periphery 2 (FCA) bit 09 to 0 (to disable P0401 EGR Test)
-XXX- Unrelated, but a good change for anyone with problems - Change periphery 4 (FEA) bit 14 to 1 (to disable MAP vs Baro test on startup - not necessary but doesn't hurt)
For emissions:
Update your OBDII tables to report "passed" for the EGR test. I will allow you to find this elsewhere.
https://www.evolutionm.net/forums/no...refer-mac.html
#6
Newbie
Thread Starter
Join Date: Jun 2015
Location: Switzerland
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
i read this thread and at the first time i have made this without problems
my problem now is the dual map if with that method i disable the egr systeme in both maps
my rom is 88580714 and i have 1 to address="103D" and 0 a address="1041"
so is the address 103D that i need change right?
my problem now is the dual map if with that method i disable the egr systeme in both maps
my rom is 88580714 and i have 1 to address="103D" and 0 a address="1041"
so is the address 103D that i need change right?
Trending Topics
#8
Evolved Member
iTrader: (4)
my problem now is the dual map if with that method i disable the egr systeme in both maps
my rom is 88580714 and i have 1 to address="103D" and 0 a address="1041"
so is the address 103D that i need change right?
my rom is 88580714 and i have 1 to address="103D" and 0 a address="1041"
so is the address 103D that i need change right?
Most of us use ECUFlash to do the editing. I have also not played with ECUTek.
#9
Newbie
Thread Starter
Join Date: Jun 2015
Location: Switzerland
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
I remaped the car and the egr routine are disable, now the engine is very rich, it runs great at cruise but i have 12.2:1 between 2500/3000rpms in 3° gear and 14.5:1 in 4° gear :s
why i have this difference?
why i have this difference?
#10
Newbie
Thread Starter
Join Date: Jun 2015
Location: Switzerland
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
Hi guys
wich is the difference between knock sun 3E and knock sun 26 in evoscan?
when i start the engine i have 1 knock sun 3E and the knock sun 26 stay at 0
wich is the difference between knock sun 3E and knock sun 26 in evoscan?
when i start the engine i have 1 knock sun 3E and the knock sun 26 stay at 0
Thread
Thread Starter
Forum
Replies
Last Post
OG
ECU Flash
7
Mar 13, 2013 09:58 AM
pltek
General Engine Management / Tuning Forum
2
Dec 10, 2007 11:51 AM