How to tell if your ECU has been reflashed?
Apr 14, 2017, 10:52 AM
#1
How to tell if your ECU has been reflashed?
I recently purchased an Evo 8. It has your normal bolt-ons and a manual boost controller. I'm in the process of removing everything and putting it back to stock. I'm assuming that the Ecu has been reflashed when the boost was turned up, but I'm not sure. Is there any way that I can checking the Ecu is reflashed or original?
Apr 15, 2017, 09:35 AM
#3
Im certainly no tuning expert, but have been tuned many times & watched the process
You will need to download the ROM from your ECU. There is certainly no RED flags that jump out noting the ECU parameters have been changed
It will take a tuner to compare the ROM w/stock settings to determine what values were changed (boost, timing, checksum, etc)
You will need to download the ROM from your ECU. There is certainly no RED flags that jump out noting the ECU parameters have been changed
It will take a tuner to compare the ROM w/stock settings to determine what values were changed (boost, timing, checksum, etc)
Apr 15, 2017, 03:39 PM
#4
Nice car man congrats, well if somebody flash your rom is for sure that enable tephra mods is the most cool baseline for tune, so download your rom and check if tephra mods is enable, if yes for sure your car has been flashed, but don't complicate yourself and find your stock rom, flash to your car and enjoy.
Thread
Thread Starter
Forum
Replies
Last Post
Ralliartize It
For Sale - Interior / Exterior / Sound / Styling
19
Jun 30, 2014 05:09 PM
