ETS Michael

iTrader: (91)

If your getting the overheat warning then this probably won't fix it. There is something else wrong.

- Robert

Jacblack

I was hoping this would allow for longer stage times but I guess no one is clear on that. Just seeing if it were added benefits to the launch maps besides just spooling the turbo. For example in a GTR I can see on LC longer than what I’m able to do in the MR, just makes grudge racing a little easier at the track.

franzcars

You'll still get the error, it just lets you build more/any boost, but for grudge racing, would let you go in second and be up on boost faster

ETS Michael

iTrader: (91)

I have yet to time my LC out on the MR. I have sat on it from the time it took someone to light up both bulbs and roll through the sportsman tree. It was probably about 5-6 seconds in total. Might be different for different years though.

- Robert

npallavi

Hey,

I have been getting my tune finalized for a
2008 X MR
Internal ID 53050312
Inherits 53050012

We have been trying to get spark cut and launch maps working together. My tuner said "brake switch - so i double checked the code - it's definitely "right" - but i chatted with some other tuners in the USA and we aren't convinced the launch maps are actually turning on properly on the sst cars."

Is this still an on going issue that's being resolved?

Thanks for any info or help.

franzcars

Did you use my second patch to enable launch maps, or are you just using a standard v3?

npallavi

Hi Franzcars,

I was unaware of a second patch, Not sure if my tuner has patched the V3.

franzcars

By default launch maps do not work on v3, you need a patch to switch the clutch switch input from launch maps to the brake switch input

GeoMitsu

How can I/we get the patch ?
Do you mean the spark cut patch or something else ?


Thanks for your reply.

franzcars

It's a patch that enables launch maps using the brake switch instead of the clutch switch, but if you email me I'll see if I have it

GeoMitsu

I've sent you a private message probably it didn't reach ... !

GeoMitsu

Thanks franz for your help and support.
I confirm that the spark cut is working perfectly with the Tephra V3

10isace

iTrader: (12)

I have 55580306, USDM 2010 MR. I'd love to get this working. Thanks!