EvoScan Logs Missing Data
#1
Newbie
Thread Starter
EvoScan Logs Missing Data
This issue has me stumped, and I'm not sure where to begin in fixing it.
EvoScan can see wideband data, and had been logging it perfectly.
It can still see wideband data, but as of recently, no longer logs it.
Below is a picture showing the wideband's live data as visible, and the log with blank cells in Excel. MegaLog Viewer HD also shows no data in these new logs. The live values shown in EvoScan match the wideband's live reading on its gauge. It's connected via serial port.
Help would be appreciated. Thanks.
EvoScan can see wideband data, and had been logging it perfectly.
It can still see wideband data, but as of recently, no longer logs it.
Below is a picture showing the wideband's live data as visible, and the log with blank cells in Excel. MegaLog Viewer HD also shows no data in these new logs. The live values shown in EvoScan match the wideband's live reading on its gauge. It's connected via serial port.
Help would be appreciated. Thanks.
#3
Newbie
Thread Starter
When logging, EvoScan shows the wideband's live data, and it does agree with the readout on the gauge itself.
But, it just started not recording the info into datalogs after saving several that did work throughout the day.
Last edited by ZMX; Nov 2, 2017 at 10:58 AM. Reason: punctuation
#4
Evolved Member
Ahh i see so it reads live data but doesnt log it. Try setting a different communication port.
Thread
Thread Starter
Forum
Replies
Last Post
jogi_rm
Evo X Engine Management / Tuning Forums
0
Sep 18, 2014 03:52 AM
EriCS
General Engine Management / Tuning Forum
3
Sep 6, 2013 06:34 AM