Hitting Boost Cut On MBC

Reply Subscribe

Thread Tools

Search this Thread

Mar 1, 2018, 01:26 PM

TariqEvo

Evolving Member

Thread Starter

Join Date: Dec 2013

Location: Kenya

Posts: 281

Likes: 31

Received 7 Likes on 6 Posts

Hitting Boost Cut On MBC

So I am currently using a Hallman Pro RX Manual Boost Controller, and I am hitting boost cut everytime I exceed something around 320 load
This is what my boost limit table looks like. Why are these values in percentage, is there anyway I can change them to load?
Note: My car has only a MAF sensor and no MAP sensor

Reply Like

Mar 1, 2018, 03:01 PM

RightSaid fred

Account Disabled

Join Date: Mar 2013

Location: in a garage

Posts: 714

Likes: 19

Received 22 Likes on 21 Posts

Check your IDC.....it'll be too high.

Reply Like

Mar 1, 2018, 07:34 PM

400s

Newbie

Join Date: Mar 2014

Location: C

Posts: 73

Likes: 5

Received 6 Likes on 5 Posts

Tariq... if you have not played around with your maf scaling then 320 load is well over 2 bar

the values you see there are load values... 230 translates to something like 1.3 or 1.4 bar...

thats why why you are hitting boost cut...

Reply Like

Mar 1, 2018, 08:43 PM

TariqEvo

Evolving Member

Thread Starter

Join Date: Dec 2013

Location: Kenya

Posts: 281

Likes: 31

Received 7 Likes on 6 Posts

Quote:

Originally Posted by 400s

I have not played with my maf scaling, its completely how it is from factory, except that I am running a K&N intake,

Also, if those are load values, how come I am hitting the cut at 320 rather than 230?

Reply Like