Flash Evo 7 GTA ROM into Airtrek Turbo ECU
#1
Newbie
Thread Starter
Flash Evo 7 GTA ROM into Airtrek Turbo ECU
I have read that people are flashing a E7 GTA Rom into an Airtrek Turbo ECU and thinking of doing the same as the 3 port boost control must be better (without boost / fuel cuts when shifting) compared to the normal Airtrek ROM. Are there any important things when flashing the E7 GTA ROM to Airtrek ECU to keep in account?
Thanks in advance,
Roy
Thanks in advance,
Roy
The following users liked this post:
rjwkerkhof (Dec 25, 2018)
#3
Evolving Member
GTA rom seems better option for 3 port as definition has the BCS correction latency defined.. I think there is also a table for ingnition retard on trans shift...
I had issues getting 3 port to work well with 010 rom .. it did work but would over boost on gear change.
Interested to hear if you get it to work well with the GTA rom
#4
#6
#7
Evolving Member
Trending Topics
#8
I obtained an updated XML from Merlin but it is not free. 2byte load, logging boost with evo x 3 bar, using a bcs to control boost , with various other features. I am also interested in certain feature from Pisyakot. I am hoping he has resolve SD for the auto airtrek.
#9
Today i use true sd implementation based on lancer rom (4g18 no maf rom). It`s my 2.4l with mivec head on map
#10
Hi. I can see that you modified the 4g18 ECU and the rom. i have the ecu, but from and XML is not properly defined. Would you share me the the ROM with XML? i do not mind paying you pennies, I would be happy to pay you to help me