Load value logged is incorrect
Jun 21, 2019, 11:18 AM
#1
Load value logged is incorrect
Rom is 96530706
My rom Load Factor is set to 1.2 and with evoscan set to 1.2*x it appears to log a load value that's approximately 12% higher than the value the ecu is using on my ignition map.
I verified this by putting 2 small holes in my ignition map at 100load and 200load then did a 3rd gear roll on.
I currently have evoscan set to 1.1"x and it's really close. Within a couple percent.
Anybody else experience this and or fix it?
Tia
My rom Load Factor is set to 1.2 and with evoscan set to 1.2*x it appears to log a load value that's approximately 12% higher than the value the ecu is using on my ignition map.
I verified this by putting 2 small holes in my ignition map at 100load and 200load then did a 3rd gear roll on.
I currently have evoscan set to 1.1"x and it's really close. Within a couple percent.
Anybody else experience this and or fix it?
Tia
