Evostacio's JMS racing 2.0 build
#1
Evolving Member
Thread Starter
iTrader: (1)
Join Date: Apr 2009
Location: san clemente/ san antonio
Posts: 218
Likes: 0
Received 0 Likes
on
0 Posts
Evostacio's JMS racing 2.0 build
Well here are some results after my build was very satisfied gonna change out some parts that suck, such as my aem intake then go back for some more power.
mods
jms racing 2.0
FP black
2200cc injectors
kelford 272 cams
buschur upper intercooler
ams intercooler
ams lower intercooler
thats the important stuff if you have any questions feel free to ask away..
this was done on 34 psi on the FP black jb turbo.. it is my daily driven car also
mods
jms racing 2.0
FP black
2200cc injectors
kelford 272 cams
buschur upper intercooler
ams intercooler
ams lower intercooler
thats the important stuff if you have any questions feel free to ask away..
this was done on 34 psi on the FP black jb turbo.. it is my daily driven car also
Last edited by Evostacio; Dec 22, 2011 at 01:23 AM.
Trending Topics
#9
Evolving Member
Thread Starter
iTrader: (1)
Join Date: Apr 2009
Location: san clemente/ san antonio
Posts: 218
Likes: 0
Received 0 Likes
on
0 Posts
Drives like stock with my exedy twin. Starts right up on the first try on stock ecu 2200 injectors. Full ac and heater. It's my daily driver so I have no issues at all driving it in traffic or anything
#10
Evolving Member
Thread Starter
iTrader: (1)
Join Date: Apr 2009
Location: san clemente/ san antonio
Posts: 218
Likes: 0
Received 0 Likes
on
0 Posts
Crap forgot the engine mounts I got them from Awd Motorsports from mike. They are purple ones if that helps I replaced them but not the back one cause that one is know to cause massive amounts of shaking which I didn't want