English Racing built 2.2SLR/HTA86/700+hp inside!!
#1
English Racing built 2.2SLR/HTA86/700+hp inside!!
So time for a big update. This is my third time having my car tuned by Aaron and Lucas. This time however, we started with a ground up build. Peep my build thread here for pics and info.https://www.evolutionm.net/forums/al...ld-thread.html
Got some evos together at Dynojet for our annual tuning day. Put my new build on the dyno and got some great results. We couldnt get the turbo to take any more boost, so we stopped for the day at 35 psi. Results were 790whp/605wtq. The car has an incredibly broad power and. 35psi is reached at 4950rpm in 3rd and it carries 700+ from 6200-9000rpm. This is going to be one incredible street car.
Motor is a ER 2.2SLR -
Wiseco HD's in 9.0:1
R&R I beams 153mm
K1 94mm lightweight crank
All ARP fasteners
Bushmaster ported cylinder head
1mm over GSC valves
Kiggly race beehives
Kiggly HLA
GSC s3 cams
Turbo is an HTA3586r in .82ar Vband, hung off a coated Buschur vband manifold.
Other mods
S90 throttle body
STM ported skunk2 manifold
ToxicFab aluminum LICP
ToxicFab 4" intake
Tial BOV
FIC 2150's
Buschur double pumper
ETS 3.5" front mount(flows well enough for nearly 800whp) & UICP
Shep stage 2 ultimate ratio trans
I know I am missing other crap as well.
Car went 134mph with 170 less HP, so I am pretty sure we can tickle high 140's as it sits.
Got some evos together at Dynojet for our annual tuning day. Put my new build on the dyno and got some great results. We couldnt get the turbo to take any more boost, so we stopped for the day at 35 psi. Results were 790whp/605wtq. The car has an incredibly broad power and. 35psi is reached at 4950rpm in 3rd and it carries 700+ from 6200-9000rpm. This is going to be one incredible street car.
Motor is a ER 2.2SLR -
Wiseco HD's in 9.0:1
R&R I beams 153mm
K1 94mm lightweight crank
All ARP fasteners
Bushmaster ported cylinder head
1mm over GSC valves
Kiggly race beehives
Kiggly HLA
GSC s3 cams
Turbo is an HTA3586r in .82ar Vband, hung off a coated Buschur vband manifold.
Other mods
S90 throttle body
STM ported skunk2 manifold
ToxicFab aluminum LICP
ToxicFab 4" intake
Tial BOV
FIC 2150's
Buschur double pumper
ETS 3.5" front mount(flows well enough for nearly 800whp) & UICP
Shep stage 2 ultimate ratio trans
I know I am missing other crap as well.
Car went 134mph with 170 less HP, so I am pretty sure we can tickle high 140's as it sits.
Last edited by GotWheelHop; Nov 23, 2013 at 11:59 PM.