Notices
Evo Dyno Tuning / Results Discuss vendor and member dyno tuning techniques, results and graphs.

FP 71HTA / S2's / E85 / 459 & 402 @ 24PSI / RRE "Sam" Tuned

Thread Tools
 
Search this Thread
 
Old Feb 7, 2018, 06:35 PM
  #1  
EvoM Staff Alumni
Thread Starter
iTrader: (3)
 
MinusPrevious's Avatar
 
Join Date: May 2008
Location: So.Cal
Posts: 7,704
Received 1,384 Likes on 1,317 Posts
FP 71HTA / S2's / E85 / 459 & 402 @ 24PSI / RRE "Sam" Tuned

Gents

Just watched Sam at RRE tune-up my ride this afternoon. The tune went w/out a hitch. No hiccups on 91 & then went to E85

The limiting factor that didnt get it to 480WHP were the injectors (RC1000's)

Pleased to have lowered my max boost down to 24PSI from the previous tune at 27PSI

Bringing it home tomorrow & will be doing an engine detail & re-installing all the other bits I removed before delivering it to RRE

Overall, very pleased w/the the finite details RRE gave to all the rework done (60K service done, 71HTA install, FP Intake / S2's w/springs & the TOON)

The dark blue line is the 91 run




Last edited by MinusPrevious; Feb 7, 2018 at 07:35 PM.
The following users liked this post:
SoSoEVO (Dec 13, 2018)
Old Feb 7, 2018, 06:44 PM
  #2  
Evolving Member
iTrader: (12)
 
Siluck2's Avatar
 
Join Date: Sep 2011
Location: Boise, ID
Posts: 201
Likes: 0
Received 17 Likes on 17 Posts
Good numbers. I’ll be running the hta71 with a 2.2, S2’s and curt brown ported head. Can’t wait to get it running.
Old Feb 7, 2018, 06:46 PM
  #3  
EvoM Staff Alumni
Thread Starter
iTrader: (3)
 
MinusPrevious's Avatar
 
Join Date: May 2008
Location: So.Cal
Posts: 7,704
Received 1,384 Likes on 1,317 Posts
Originally Posted by Siluck2
Good numbers. I’ll be running the hta71 with a 2.2, S2’s and curt brown ported head. Can’t wait to get it running.
Your set-up will certainly bark. Got to run E85?
Old Feb 7, 2018, 08:42 PM
  #4  
Newbie
 
evo4life94's Avatar
 
Join Date: Jul 2011
Location: California
Posts: 78
Received 1 Like on 1 Post
Nice numbers!
I'm running the fp 71hta on stock block/cams pushing 415whp and getting my s2 cams soon, also going to RRE. Your numbers have me excited since my goal was to get 450whp
Old Feb 7, 2018, 08:48 PM
  #5  
Evolved Member
iTrader: (1)
 
2006EvoIXer's Avatar
 
Join Date: Jul 2012
Location: California
Posts: 3,294
Received 194 Likes on 182 Posts
Awesome!

Old Feb 7, 2018, 08:54 PM
  #6  
Evolved Member
iTrader: (1)
 
2006EvoIXer's Avatar
 
Join Date: Jul 2012
Location: California
Posts: 3,294
Received 194 Likes on 182 Posts
Did you rewire your fuel pump? I made about the same power with RC1200. I'm hitting 104% IDC, so I wonder where your injectors are at.
Old Feb 7, 2018, 09:39 PM
  #7  
Evolved Member
iTrader: (36)
 
e_kobz's Avatar
 
Join Date: Apr 2013
Location: Queen Creek, AZ
Posts: 2,960
Received 98 Likes on 94 Posts
Awesome numbers man. I bet this thing rips. I would love to see this setup push 30psi and see if it breaks the 500whp mark. This makes me wants to get S2’s. Our cars made similar power only I was on stock cams and ran 30psi. I need S2’s like right now
Old Feb 8, 2018, 05:49 AM
  #8  
EvoM Staff Alumni
Thread Starter
iTrader: (3)
 
MinusPrevious's Avatar
 
Join Date: May 2008
Location: So.Cal
Posts: 7,704
Received 1,384 Likes on 1,317 Posts
Originally Posted by evo4life94
Nice numbers!
I'm running the fp 71hta on stock block/cams pushing 415whp and getting my s2 cams soon, also going to RRE. Your numbers have me excited since my goal was to get 450whp
Yeah, the S2's will wake up your top end. Gus, Sam & Robert will certainly guide you through the process. Keep us posted

Originally Posted by 2006EvoIXer
Awesome!

Thanks,

Originally Posted by 2006EvoIXer
Did you rewire your fuel pump? I made about the same power with RC1200. I'm hitting 104% IDC, so I wonder where your injectors are at.
Injectors were at 96% IDC at 7500 rpm. Sam left some room at the top as he knew this was a track day car. He did note that w/larger injectors, 480WHP would have been no problem. Stock Wally 255


Originally Posted by e_kobz
Awesome numbers man. I bet this thing rips. I would love to see this setup push 30psi and see if it breaks the 500whp mark. This makes me wants to get S2’s. Our cars made similar power only I was on stock cams and ran 30psi. I need S2’s like right now
No way to get to 30PSI w/out the injectors, but was actually happy to see him lower my boost from the orig tune at 27psi to 24psi and achieving more WHP. Will be picking it up this afternoon.

Your set-up is what inspired me to follow in your steps
Old Feb 8, 2018, 06:25 AM
  #9  
Evolved Member
iTrader: (1)
 
2006EvoIXer's Avatar
 
Join Date: Jul 2012
Location: California
Posts: 3,294
Received 194 Likes on 182 Posts
What other mods does your car have? I'm curious if the tiny jump in hp at the very end is normal for S2 cams on 91. I found it strange when I first saw it on my car and now I see your car has it too. Wonder if S2 would make more power to 8000rpm.
Old Feb 8, 2018, 07:06 AM
  #10  
EvoM Staff Alumni
Thread Starter
iTrader: (3)
 
MinusPrevious's Avatar
 
Join Date: May 2008
Location: So.Cal
Posts: 7,704
Received 1,384 Likes on 1,317 Posts
Originally Posted by 2006EvoIXer
What other mods does your car have? I'm curious if the tiny jump in hp at the very end is normal for S2 cams on 91. I found it strange when I first saw it on my car and now I see your car has it too. Wonder if S2 would make more power to 8000rpm.
Nisei 3.75" Race FMIC w/short route pipes / Full 3" Invidia exhaust (stock 02) / No CAT / FP Open intake w/MAF / FP 71HTA / RC1000's / 3 port boost solenoid / S2's w/springs (all other bits are stock)

Sam noted that there was more room above 7500rpm but at 96% IDC, he shut the throttle down
Old Feb 8, 2018, 07:16 AM
  #11  
Evolving Member
 
revhappy's Avatar
 
Join Date: May 2003
Location: North Jersey
Posts: 451
Received 14 Likes on 14 Posts
Great numbers. Similar set up to me.
Old Feb 8, 2018, 07:28 AM
  #12  
Evolved Member
iTrader: (1)
 
2006EvoIXer's Avatar
 
Join Date: Jul 2012
Location: California
Posts: 3,294
Received 194 Likes on 182 Posts
Sam tuned my car to 99% IDC but at night, temps are cooler and I'm hitting 104%. If you're making the same power with 20% smaller injectors, I'm even more confident that fuel pump rewire will solve my needs.

Last edited by 2006EvoIXer; Feb 8, 2018 at 09:37 AM.
Old Feb 8, 2018, 09:27 AM
  #13  
Evolved Member
iTrader: (1)
 
2006EvoIXer's Avatar
 
Join Date: Jul 2012
Location: California
Posts: 3,294
Received 194 Likes on 182 Posts
With your test pipe and upgrading your O2 housing and more fuel, I think you can hit 500 hp. Why didn't you replace the O2 with the HTA 71?

Originally Posted by MinusPrevious
Nisei 3.75" Race FMIC w/short route pipes / Full 3" Invidia exhaust (stock 02) / No CAT / FP Open intake w/MAF / FP 71HTA / RC1000's / 3 port boost solenoid / S2's w/springs (all other bits are stock)

Sam noted that there was more room above 7500rpm but at 96% IDC, he shut the throttle down
Old Feb 8, 2018, 09:37 AM
  #14  
Evolved Member
iTrader: (92)
 
fimotorsports's Avatar
 
Join Date: Dec 2003
Location: San Diego CA
Posts: 1,590
Received 3 Likes on 3 Posts
well done, which springs did you go with?
Old Feb 8, 2018, 09:44 AM
  #15  
EvoM Staff Alumni
Thread Starter
iTrader: (3)
 
MinusPrevious's Avatar
 
Join Date: May 2008
Location: So.Cal
Posts: 7,704
Received 1,384 Likes on 1,317 Posts
Originally Posted by 2006EvoIXer
With your test pipe and upgrading your O2 housing and more fuel, I think you can hit 500 hp. Why didn't you replace the O2 with the HTA 71?
It did cross my mind but, I guess my thoughts are not to over stress my poor stock block & tranny



Originally Posted by fimotorsports
well done, which springs did you go with?
GSC Behives w/the Ti retainers / Head was rebuilt as well


Quick Reply: FP 71HTA / S2's / E85 / 459 & 402 @ 24PSI / RRE "Sam" Tuned



All times are GMT -7. The time now is 05:50 AM.