BBK-B Evo 9 Stock ECU Maf Based
 

Blue pull went 11.7@116-7mph on straight 93 with a stock 9 turbo@26-7psi

Red is were the BBK-B at the same 26-27psi got us, almost the same spool as his 9 turbo.. but about 100whp more. I like this turbo a lot!

Mods

Toxic Fab o2 {thumbup}
TurboTrix Drop in piston/rod
FIC 850s
TXS/HyperFlow FMIC
Kelford 280s
Hallman MBC

Next round will include SD and a GMS BCS. I expect faster spool and better top end power. I cant wait!! This turbo is by far my favorite bolt in. The car is an absolute blast to drive. Feels like a stock turbo hitting and then it just rips up the top end. Nice work CBRD

******* EDIT Car went 11.7@125mph with some serious bogs. I can see 127-8mph once I fix the 2step ************************

http://i3.photobucket.com/albums/y60...-40-23_740.jpg

In RPM
http://i3.photobucket.com/albums/y60...-41-26_248.jpg

Wow great numbers! Thanks for the numbers junior!

Damn 450 on 93oct? Pretty impressive.

Very nice, this Turbo is looking better all the time.

That's awesome! GL on SD and I hope you meet your goals and max out that turbo!

Special thanks to Turbotrix, Jason@specops, Colin@toxicfab, 06evomr. All helped me with this. Car feels awesome. I will be doing a vid about it when it gets a little warmer.

Nice :)

Thanks for the input guys-

if you have anything more specific youd like to share with us, please pm or email me!

congrats on your build!

cb

Very good job Junior. This car is right behind me in hp....I like it

Nice first dynojet #'s for the BBKB! I made 450whp on the BBK full on 94 octane @ 29psi so this turbo definately has more in it.

Hey red, glad I could help ya out:)

Welcome Pat, glad I could help out man & glad your happy with the results...I have a feeling its time for a Toxicfab Exhaust manifold...{thumbup}


This is my local buddy that I told you about Chad, can't wait till he gets an aftermarket intake mani & tb & retunes on SD!

Once again, great job Junior! 300whp by 4400, not too bad...when was it hitting full boost??

Great numbers!

Seems like there is more left in the turbo considering the mods. Wasn't expecting it to spool like that with those 280s.

OP, are planning on upper/lower intercooler piping and intake? I noticed you mentioned SD. Also, get us some track times!

Congrats!