Evo9 built motor 6262 stm forward facing etc...
 

Took it out for some street tuning today and threw a log into the virtual dyno, I am on 91 octane pump gas and about 24.5psi... I will have it on a real dyno along with a race gas tune in a few weeks!

Motor
ACL race bearings
ARP L19 headstuds
Brian Crower I beams
JE pistons
Supertech valve springs and retainers
GSC S2 cams

Turbo
Precision 6262
STM forward facing manifold
STM 3'' downpipe
Custom 2.5'' Intercooler piping
ETS 3.5'' initercooler
Tial 50mm blow off valve
Tial MVR wastegate

Electronics/fuel
AEM ems
AEM boost solenoid
Omnipower 4 bar
ID1000 injectors

Some pictures

http://i8.photobucket.com/albums/a49/tturbo20/dyno2.jpg

http://i8.photobucket.com/albums/a49...oSTMbuild2.jpg

http://i8.photobucket.com/albums/a49...oSTMbuild1.jpg

http://i8.photobucket.com/albums/a49...oSTMbuild3.jpg

http://i8.photobucket.com/albums/a49...ySTMbuild2.jpg

http://i8.photobucket.com/albums/a49...ySTMbuild1.jpg

http://i8.photobucket.com/albums/a49...oSTMbuild4.jpg

http://i8.photobucket.com/albums/a49...oSTMbuild5.jpg

Threw the BBS's on
http://i8.photobucket.com/albums/a49...20/photo-4.jpg

Wow. Absolutely gorgeous car man. Perfect setup!

Power seems kinda low. I guess its just the crappy 91 octane

Nice setup though

I love the STM mani's. They look awesome. Not to mention I bet your car sounds insane. With the proper button pushing your car should see well north of 600whp all dayy

Not bad for 91 octane! I agree also, the STM manifolds look great!

Car looks completely badass! Great power for 91 oct. too!


-Em

Good numbers for 91, I just couldn't justify spending all that money for just that much power though. Very clean car bro

Thanks everyone, Em I am really glad I got rid of that other manifold I had and bought this one from you the other one did not compare to the fitment and quality


Thanks and yeah I would use e-85 but there are only a few select stations here that have it and our 91 is terrible allthough there may still be some power that can be made on it... Race gas will be a whole different story

Wow that car is in immaculate condition.

I'm glad you like it. Its def. My favorite manifold out there too.


-Em

Car looks awesome man I bet it sounds mean too

Thanks the car only has 30k on it and most of those miles were put on before I bought it from the original owner it pretty much only see's weekends when the weather is decent and when the track is open

Very nice setup. I love your car. So clean

Very clean car. Love the setup.

I would be so paranoid driving that car without having a screen over the turbo lol.

It's not bad , lol
Looks badass Todd can't wait to see it at the track

I would of done a duel map. One for your 91 oct then the other for e85. Like when ever you go to the pump I would bring gas can and fill up some e85 to take home with you. Where I live we just got one station with e85. I am going to do the duel map thing also. But I am going to prob have to get bigger injectors.

I am doing 2 maps one for pump gas and one for c16

Where is your build thread? You need to make one!!

Welcome to the FF club. Are speed density as well? I love the way the car sounds now. You can hear everything. Sounds like a damn jet.

Played with some race gas and about 30psi tonight......

http://i8.photobucket.com/albums/a49...acegasdyno.jpg

What's the compression ratio?
Why go with S2s vs S3s?

-Acree

Awesome!! Needs track visit ASAP!

I bet it feels insane.{thumbup}

How did you get the STM downpipe?

Bought the manifold and downpipe off the "ricer"

Wanted better street ability and 8.5:1

Also, could you send me that 30 psi log file? I'd like to overlay it with one of mine

Sure I will send it to you

Must be a blast to drive with new power!

Email it to drummer_myko@yahoo