Notices
Evo Electrical / Audio / Security Discuss electrical systems, audio system upgrades, or alarm configurations.

OEM 06 MR Guages not getting power

Thread Tools
 
Search this Thread
 
Old Apr 21, 2012 | 01:21 PM
  #1  
yacubkep's Avatar
Thread Starter
Newbie
Veteran: Air Force
10 Year Member
iTrader: (14)
 
Joined: Mar 2012
Posts: 94
Likes: 4
From: Esko MN
OEM 06 MR Guages not getting power

I have searched all over the forum, but no success.

All the guages in my 06 MR do not get power at all. Is there a fuse for all of them? i took them out and lost where the harness hooks up for them.

Any Ideas?
Reply
Old Apr 21, 2012 | 01:34 PM
  #2  
nytalonTSi's Avatar
Evolved Member
iTrader: (18)
 
Joined: Jul 2010
Posts: 521
Likes: 1
From: Land Of Opportunity
If you remove the cover(over the gauges), there is a ground wire that is held in by a screw that is also holding in the gauge set. IIRC the wire is on the right side screw.
Reply
Old Apr 21, 2012 | 02:43 PM
  #3  
yacubkep's Avatar
Thread Starter
Newbie
Veteran: Air Force
10 Year Member
iTrader: (14)
 
Joined: Mar 2012
Posts: 94
Likes: 4
From: Esko MN
Originally Posted by nytalonTSi
If you remove the cover(over the gauges), there is a ground wire that is held in by a screw that is also holding in the gauge set. IIRC the wire is on the right side screw.
i'll check for the ground hook up, what about power to them?
Reply
Old Apr 21, 2012 | 03:24 PM
  #4  
yacubkep's Avatar
Thread Starter
Newbie
Veteran: Air Force
10 Year Member
iTrader: (14)
 
Joined: Mar 2012
Posts: 94
Likes: 4
From: Esko MN
okay took it all apart a few minutes ago....

previous owner took out the inline harness to the radio and just left it there.....

so now the volt meter works and lights up, the boost gauge lights up... the oil temp gauge doesn't work at all.. no lights and doesn't move... probably a shot gauge now..
Reply




All times are GMT -7. The time now is 04:19 AM.