Negative terminal clamp cracked
#1
Newbie
Thread Starter
Join Date: Jul 2017
Location: New York
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Negative terminal clamp cracked
Hey guys , have an evo 8 and I have a slightly problem with my negative terminal clamp, as you can see it’s cracked . I’ve been searching and all I see is that you have to run a longer harness wire or something like that to get it fix . Can someone please help a solution to this .
#2
Evolved Member
iTrader: (23)
Just need to order this harness to replace the old one.
https://stmtuned.com/products/positi...ap-oem-evo-8-9
https://stmtuned.com/products/positi...ap-oem-evo-8-9
#3
EvoM Community Team Leader
If you don't want to spring for the harness, you can just cut it off and install an aftermarket replacement.
Something like this would probably be the easiest to set up.
https://www.mcmaster.com/7980k52
I'm pretty sure that's the right gauge but you might want to double check.
Something like this would probably be the easiest to set up.
https://www.mcmaster.com/7980k52
I'm pretty sure that's the right gauge but you might want to double check.
Last edited by Biggiesacks; Apr 25, 2019 at 04:54 PM.
#4
Evolving Member
If you don't want to spring for the harness, you can just cut it off and install an aftermarket replacement.
Something like this would probably be the easiest to set up.
https://www.mcmaster.com/7980k52
I'm pretty sure that's the right gauge but you might want to double check.
Something like this would probably be the easiest to set up.
https://www.mcmaster.com/7980k52
I'm pretty sure that's the right gauge but you might want to double check.