Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

RC engineering saturated high impedence injectors

Thread Tools
 
Search this Thread
 
Old Nov 24, 2004 | 10:37 AM
  #1  
TampaTurbo's Avatar
Thread Starter
Evolved Member
iTrader: (7)
 
Joined: Jul 2004
Posts: 1,068
Likes: 0
From: Tampa area
Question RC engineering saturated high impedence injectors

Anybody have these RC style injectors. I got off the phone with them and said these were the quitest injectors they have. They said they were more quiet than stock. My dilemma is they are not and make a loud ticking noise at idle and get louder at part acceleration. It sounds like there is something rattling under the hood. Was curious to see if anyone else had these style injectors. If so any comments would be appreciated. RC said not to worry about the ticking and I should be ok until he figured they were saturated injectors. Still thinks there shouldnt be a problem. But I will do the 9 volt test and see.
Reply
Old Nov 24, 2004 | 04:40 PM
  #2  
bishiboy's Avatar
Evolved Member
iTrader: (10)
 
Joined: Jan 2003
Posts: 942
Likes: 0
From: Yuma AZ
I thought the Evo (and DSMs) used low impedance injectors (2.5-3.0 ohms). Those saturation are like 12 ohms or more?
Reply




All times are GMT -7. The time now is 04:40 AM.