Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

Questions....Just Installed 272 cams

Thread Tools
 
Search this Thread
 
Old Nov 24, 2004 | 02:47 PM
  #1  
edtxag's Avatar
Thread Starter
Evolving Member
iTrader: (5)
 
Joined: Mar 2004
Posts: 222
Likes: 0
From: South Padre Island, TX
Questions....Just Installed 272 cams

Ok I just finished installing all of this and I am having problems turning my car on, however if i give it gas i get it going and once i fixed the idling via the turn screw to let more air in it goes good as i rev up it does ok as well. my question is this did you all have the same type of problems which were solved via tuning or is this uncommon. I cant just turn the key anymoe and get it going i have to pump the gas pedal and it eventually starts. Like i said i also adjusted the idling via the screw and made sure the line was taught

help me out with some feedback and thoughts


-ED
Reply
Old Nov 24, 2004 | 02:53 PM
  #2  
bolsen's Avatar
Evolved Member
iTrader: (2)
 
Joined: Apr 2004
Posts: 1,940
Likes: 1
From: Milwaukee, WI
Did you tune for them?
Reply
Old Nov 24, 2004 | 02:55 PM
  #3  
edtxag's Avatar
Thread Starter
Evolving Member
iTrader: (5)
 
Joined: Mar 2004
Posts: 222
Likes: 0
From: South Padre Island, TX
well it is suppose to be on my Xede but not sure if it is or not I had some issues where i might have erased the map it came with
Reply
Old Nov 24, 2004 | 03:26 PM
  #4  
Ted B's Avatar
EvoM Guru
20 Year Member
Photogenic
Photoriffic
Liked
iTrader: (6)
 
Joined: Aug 2004
Posts: 6,334
Likes: 63
From: Birmingham, AL
Adjusted the idle by turning the screw? That's not good in itself.

You better get some help from Vishnu.
Reply




All times are GMT -7. The time now is 04:19 AM.