Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

Greddy Turbo Upgrade...

Thread Tools
 
Search this Thread
 
Old Nov 26, 2004 | 10:14 AM
  #1  
truely04's Avatar
Thread Starter
Newbie
 
Joined: Nov 2004
Posts: 4
Likes: 0
Greddy Turbo Upgrade...

i recently just upgrade my evo with a greddy upgrade... complete bolt on. it's runs like a beast now. I don't know how much Hp in it but do you think I over paid for it. should produce around 450-500hp and i paid close to 4.3k for it. and by the way anyone want a stock evo 8 turbo with wastegate, and exhuast manifold. 450 thanks
Attached Thumbnails Greddy Turbo Upgrade...-turbo-1.jpg   Greddy Turbo Upgrade...-turbo-2.jpg  
Reply
Old Nov 26, 2004 | 10:15 AM
  #2  
ap-evo83's Avatar
Evolved Member
iTrader: (3)
 
Joined: Jul 2003
Posts: 610
Likes: 0
From: RAMAR village, pampanga PHILIPPINES, Temecula, CA
have you gone to the track?
Reply
Old Nov 26, 2004 | 10:21 AM
  #3  
truely04's Avatar
Thread Starter
Newbie
 
Joined: Nov 2004
Posts: 4
Likes: 0
not yet, i'm loacted in green bay, wisconsin and the tracks don't open until spring time or near summer. i wanna take it out sooooo freaking bad....
Reply
Old Nov 26, 2004 | 11:40 AM
  #4  
MitsuJoe's Avatar
Former Sponsor
iTrader: (133)
 
Joined: Dec 2003
Posts: 3,123
Likes: 0
From: Anywhere
I almost didnt read your post, then I saw the stock turbo and I was like that aint no greddy Turbo. What model did you get? Who installed it?
Reply
Old Nov 26, 2004 | 02:03 PM
  #5  
truely04's Avatar
Thread Starter
Newbie
 
Joined: Nov 2004
Posts: 4
Likes: 0
tharts is the stock turbo that came off my motor. just thoought i put pictures up and see if anyone was intersted in getting it off my hands. I have a t-67 greddy turbo setup. the bolt on kit came with the T-67 turbo, the exhuast manifold and the type R wastegate wit the stiff spring, with all the lines and fittings to install the kit. they said that it should be good for 500hp.
Attached Thumbnails Greddy Turbo Upgrade...-t67evokit.jpg  
Reply
Old Nov 26, 2004 | 06:42 PM
  #6  
jj_008's Avatar
Evolved Member
iTrader: (8)
 
Joined: Nov 2003
Posts: 2,064
Likes: 0
From: Salem, OR
At what RPM do you reach 20 psi in 3rd gear? Do you have 8cm^3 or 10cm^3 nozzle?
Reply
Old Nov 26, 2004 | 07:50 PM
  #7  
truely04's Avatar
Thread Starter
Newbie
 
Joined: Nov 2004
Posts: 4
Likes: 0
don't know. my boost controllor keeps at at a steady 14 psi. i have a 10cm.
Reply
Old Nov 27, 2004 | 09:16 AM
  #8  
jj_008's Avatar
Evolved Member
iTrader: (8)
 
Joined: Nov 2003
Posts: 2,064
Likes: 0
From: Salem, OR
If you think it is a beast now, wait until you turn the boost up to 30psi with race gas.
Reply
Old Nov 27, 2004 | 01:10 PM
  #9  
w2pac12345's Avatar
Evolved Member
iTrader: (8)
 
Joined: May 2003
Posts: 825
Likes: 0
They said good for 500 HP. That does not mean your car has that or anywhere near that. They mean it can handle up to that amunt.

I would have gone with the RNR turbo kit for a LOTTTT cheaper
Reply
Old Nov 27, 2004 | 02:24 PM
  #10  
Mark S's Avatar
Evolving Member
 
Joined: Dec 2003
Posts: 305
Likes: 0
From: England
Looks like the same manifold we get on the Greedy kits sold in the UK, Its the only kit I know that cracks quicker than the HKS ones, Very poor quality I bet you have binned it inside 1 year,
My advice sell it quick and Buy a AMS or RNR kit.

Mark
Reply




All times are GMT -7. The time now is 11:46 AM.