Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

Evo Passive Boost Solenoid Emulator Install

Thread Tools
 
Search this Thread
 
Old May 15, 2005 | 07:24 PM
  #1  
MRevo05's Avatar
Thread Starter
Newbie
 
Joined: May 2005
Posts: 39
Likes: 0
From: San Juan Capistrano CA
Evo Passive Boost Solenoid Emulator Install

what would happen and whats the out come of bypassing the boost solenoid would this couse the check engine light to come on and also would this give more horsepower?????
Reply
Old May 15, 2005 | 07:55 PM
  #2  
evolved4g63's Avatar
Evolving Member
iTrader: (11)
 
Joined: Jan 2004
Posts: 232
Likes: 0
From: Poconos
Um, u need to use some sort of boost control. But say u use a manual boost controller, just leave the stock 1 plugged in to the harness. U shouldnt get a cel. At least on my GSR i dont have a CEL.
Reply
Old May 15, 2005 | 08:26 PM
  #3  
mooreboost's Avatar
Evolved Member
iTrader: (6)
 
Joined: Mar 2005
Posts: 842
Likes: 1
From: West Palm Beach
He's right. Keep the stock one plugged in, just cap the inlet/outlet and run an MBC or EBC in its place.
Reply
Old May 16, 2005 | 12:48 PM
  #4  
MRevo05's Avatar
Thread Starter
Newbie
 
Joined: May 2005
Posts: 39
Likes: 0
From: San Juan Capistrano CA
ok but whats the out come of this would this help get more power/boost or othing really...im running a HKS EVC so i can controll the boost its set at 20.5....should i just leave it alone?
Reply




All times are GMT -7. The time now is 01:38 PM.