Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

Fighter's Garage LICP Warning!!

Thread Tools
 
Search this Thread
 
Old Jul 7, 2005 | 10:55 AM
  #1  
EvoTech's Avatar
Thread Starter
Evolved Member
iTrader: (25)
 
Joined: Feb 2004
Posts: 1,424
Likes: 1
From: Long Island
Fighter's Garage LICP Warning!!

Today I pulled my bumper off to check the clamps on my IC pipes. I noticed that an AC hose going to the compressor was rubbing against the new Fighter's Garage LICP. On further inspection I saw that it was begining to wear through the AC hose. I would say within 6 months it would have worn right through the hose. I used some wire ties to pull the hose back towards the compressor and the problem was solved. I think a lot of people are going to have issues soon if they do not check this. Just thought that I would share
Reply
Old Jul 7, 2005 | 11:01 AM
  #2  
1.8t's Avatar
Evolved Member
iTrader: (16)
 
Joined: Jul 2004
Posts: 577
Likes: 0
From: Alpharetta, Ga
I will check mine today. Thanks for the heads up. BTW, my coating is chipping on the pipe around one of the welds, is yours still holding up?
Reply
Old Jul 7, 2005 | 12:25 PM
  #3  
FightersGarage's Avatar
Newbie
iTrader: (2)
 
Joined: Apr 2005
Posts: 12
Likes: 0
From: Pensacola
Sorry about that, we simply ziptied the a/c line to the side. I forgot to add it to the tutorial but will do so immediately. On Wrick's pipe, we simply coated it with high temp paint because he wanted it right then and that finish has been holding up fine. That lower part of the car is susceptible to rocks and scrapes so you might want to give it a quick spray if you notice anything. Let me know if it becomes a concern and I will do my best to find a solution.
Reply
Old Jul 7, 2005 | 12:28 PM
  #4  
ries's Avatar
Evolved Member
iTrader: (36)
 
Joined: Jun 2005
Posts: 1,572
Likes: 0
From: Yuma, AZ
thanks for the warning
Reply
Old Jul 7, 2005 | 12:59 PM
  #5  
4-BNGR's Avatar
Evolved Member
iTrader: (3)
 
Joined: Jul 2003
Posts: 1,768
Likes: 1
From: Charlotte, NC
Are these pipes in stock? What's the deal?
Reply
Old Jul 7, 2005 | 01:04 PM
  #6  
Zeus's Avatar
EvoM Staff Alumni
iTrader: (66)
 
Joined: Aug 2002
Posts: 5,454
Likes: 1
From: Austin, TX
That should be pretty much common knowledge to anyone installing ANY of the "LICPs" out there right now. Anytime you install an aftermarket part, naturally you need to verify fitment. At that time make any adjustments required to avoid any wear issues. Then, later recheck to make sure no others have developed.
Reply
Old Jul 7, 2005 | 01:07 PM
  #7  
EVO8LTW's Avatar
EvoM Guru
20 Year Member
Photogenic
Liked
Loved
iTrader: (41)
 
Joined: Jul 2004
Posts: 4,606
Likes: 98
From: Northern Virginia
That's an issue with the Buschur deluxe FMIC too.
Reply
Old Jul 7, 2005 | 01:38 PM
  #8  
FightersGarage's Avatar
Newbie
iTrader: (2)
 
Joined: Apr 2005
Posts: 12
Likes: 0
From: Pensacola
Originally Posted by 4-BNGR
Are these pipes in stock? What's the deal?
They are being made right now. However, hurricane Dennis is headed directly towards us and the storm is strengthening. Last year, this city was practically destroyed by Ivan (my store included, roof ended up in the parking lot) so production will be slowed a bit as everybody prepares. Plus, we will most likely be without power for awhile. Third hurricane in a month, yay. Hope everyone in the area stays safe.
Reply
Old Jul 7, 2005 | 01:45 PM
  #9  
A418t81's Avatar
Evolved Member
iTrader: (5)
 
Joined: Nov 2003
Posts: 849
Likes: 0
From: Birmingham, Al
Yeah, it sucks. We are in Destin as I type this preparing our beach house for the hurricane. It was fun playing in the surf yesterday though.....the waves were washing right up to the base of our staircase down to the beach
Reply
Old Jul 7, 2005 | 02:45 PM
  #10  
Trueno86's Avatar
Newbie
iTrader: (10)
 
Joined: Feb 2004
Posts: 90
Likes: 0
Sorry to hear about the storm.... Hope you guys will be ok. Can't wait for my LICP....
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
This Guy
04-06 Ralliart General
1
May 3, 2014 09:14 PM
erald01
Evo Engine / Turbo / Drivetrain
23
Oct 17, 2009 01:58 PM
Boost3dxEvO
For Sale/WTB - Engine / Drivetrain / Power
2
Jul 11, 2009 07:13 PM
gvr4wd
For Sale/WTB - Engine / Drivetrain / Power
5
Jun 1, 2006 06:29 AM
bpclements
Evo Engine / Turbo / Drivetrain
50
Aug 30, 2005 07:56 AM




All times are GMT -7. The time now is 06:40 AM.