i just recently installed a ams turbo kit and i just fired it up and took it for a spin and i noticed that its has oil leaking out of every spot, i mean now its leaking out of the drain plug and out of the valve cover and out of the oil banjo and i never even touched the valve cover during the install, so is their sumthing that could be hooked up wrong cause this?, thanks in advance

 

oil lines on turbo crossed maybe???? cuasing back pressure??

 

When you received the kit, did you tighten every line before installing it?

 

thats really strage to have it leaking out of the valve cover if you didn't touch it. I can honestly say i have no idea what to tell you.

 

If oil is coming out of the valvecover it sounds like your lines are blocked somewhere.Did you stuff anything in the drain hole at the oilpan during install.

 

well after i drained the oil i just put the drain plug back in losely, im not sure were it could be blocked, does anyone no that if the oil banjo bolt that goes to the head has any certain way it has to go, i mean since their are little holes drilled in each side of the bolt

 

no certain way, because those holes line up with the groove in the fitting that goes around the holes.