I've have the HKS DLi 2 installed on my car for a few months now and its been working great until recently when it stopped firing #2and 3 cyl.
Trouble-shot it down to a faulty harness! i changed over mine with another which worked.
Anyone ever had a harness go bad just like that?
Can the harness be bought separately?
Or can it be fixed?

thanks
Mark

 

Check your connections are clean, they should be able to self wipe so just plug and unplug then a few times to see if that helps, if not get a ohm meter and check each wire in the harness. you might have a broken wire or bad joint were they split the wire for the coils.

 

Ok, did all the connection cleaning already with nil results. I'm gonna do the resistance check later. I was feeling along the cable under the protective covering and felt some junction type "bumps" and was wondering what they were!

 

I just bout the DLI II. Anyone have pictures or a write up on the install. I hear it's easy but I'm not sure how to connect it.