Gsc s2r cams w/ buschur head
#1
Newbie
Thread Starter
Join Date: Mar 2011
Location: USA
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
Gsc s2r cams w/ buschur head
Will these cams work with the stage 3 buschur head without having to modify anything? I know have a pretty high lift, so i just want to make sure
#3
Newbie
Thread Starter
Join Date: Mar 2011
Location: USA
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
Please post up your results^
I was told by buschur that you can go with just about any cam size you want. Just wanted to check here because not many cams actually have as much lift as the s2r
I was told by buschur that you can go with just about any cam size you want. Just wanted to check here because not many cams actually have as much lift as the s2r
#6
Evolved Member
iTrader: (16)
So heres what i gather
On buschurs site, it shows the percentage of flow at diffent valve heights. The chart goes to .500" valve lift.... The s2r cam is .475" of lift max. Im going to assume it works being as i doubt they would list a lift/flow that the head cant even preform at
On buschurs site, it shows the percentage of flow at diffent valve heights. The chart goes to .500" valve lift.... The s2r cam is .475" of lift max. Im going to assume it works being as i doubt they would list a lift/flow that the head cant even preform at
#7
Evolved Member
iTrader: (30)
Its called just the R2 now, we dropped the S2R moniker awhile ago. They will work fine with most spring combos as long as you have at least 0.500 compression to work with. Most spring packages are at least 0.550 and then bind at 0.610 something from the installed height.
Trending Topics
#10
Evolving Member
I've been running R2 cams and 5041 gsc springs/titanium retainers, on a self ported Mivec head with stock valves, for the last 15,000 miles with no problems. This is on stock pistons.
Thread
Thread Starter
Forum
Replies
Last Post
kpt6
For Sale - Cars For Sale
9
Aug 15, 2015 08:08 PM
boostawd16
Evo Engine / Turbo / Drivetrain
24
Jul 7, 2014 02:10 PM
Mellon Racing
Evo Dyno Tuning / Results
68
Feb 1, 2012 10:44 AM