Can anyone give me a ballpark figure of how much HP would be put down from a 2.3 W/ a 20G Dynoflashed, Stock intercooler, RS intake, Hi Power 30th Cat Back, Perrin Downpipe, and Helix Cat Delete?

 

i would say around 330

 

Not that there's anything wrong with Dynoflash, but why would you use that option when there are plenty of good tuners in the area? Alfred @ Tuning Tech is one of the ones that comes to mind. He does ECU+, Open Ecu, XEDE, S-AFC and AEM. There is also Scott Gray (who tunes at both TT and RRE) and RRE, among other places.

 

The 20G is the weakpoint in your setup. You might as well keep the stock turbo. Save some cash and match your 2.3 up with a 50trim or a 30 series

 

boost controller? you'd be around 370 without cams. with cams you would hit 400. i say this mainly because there is a dynograph of a 2.3 on STOCK turbo and it made 400 with 272s and everything else.

i also believe it is on pump gas....

 

the beauty of the strocker is how it helps spoolup. If you are gong that route you should go with a bigger turbo to match.