Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

Rs*R ExMag Downpipe

Old Aug 10, 2006 | 12:39 PM
  #1  
JrCRXHF's Avatar
Thread Starter
Evolving Member
 
Joined: Nov 2003
Posts: 203
Likes: 0
From: Midland Mich
Rs*R ExMag Downpipe

I am wondering if anyone has run this down pipe i am going to make it mount up to a Junb.l Cat back and i am wondering if anyone has ran it and how is boost creep with this downpipe. I am going to be putting it on a EVO 9 MR.


Here is a link for $220+

another store $250 It says its for a EVO 8

Last edited by JrCRXHF; Aug 10, 2006 at 12:52 PM.
Reply
Old Aug 10, 2006 | 03:36 PM
  #2  
C6C6CH3vo's Avatar
Evolved Member
iTrader: (9)
 
Joined: Feb 2005
Posts: 4,223
Likes: 4
From: sc
The hotside goes outboard to the side for the O2 housing. The one-piece downpipe/O2 housing in the picture wont fit on an Evo 8/9
Reply
Old Aug 10, 2006 | 08:39 PM
  #3  
JrCRXHF's Avatar
Thread Starter
Evolving Member
 
Joined: Nov 2003
Posts: 203
Likes: 0
From: Midland Mich
well that might be a pic from another car but they say it is for a evo 8 so if that was the case does that mean it will fit on a 9 MR too or do i still have to find someone who has been running it.

and with the O2 gases hitting each other that close i was wondering what about boost creep.
Reply
Old Aug 14, 2006 | 08:54 AM
  #4  
JrCRXHF's Avatar
Thread Starter
Evolving Member
 
Joined: Nov 2003
Posts: 203
Likes: 0
From: Midland Mich
so no one has used a downpipe from these guys.
Reply


Thread Tools
Search this Thread

All times are GMT -7. The time now is 01:02 PM.