PCV Rotation ??
PCV Rotation ??
I am trying to install the DC3 can to the PCV and am having trouble - the PCV angle is causing the hose to kink slightly. How can I rotate the valve ~150 degrees so that it is pointing towards the driver side (left side) ?
I tried moving it but it feels like it is not meant to be moved
...Thanks
I tried moving it but it feels like it is not meant to be moved
...Thanks
???
I personally just used a long section of hose so I could get a gradual bend in it.... I think the PCV valve itself just screws in, but if you tighten it too much trying to face it the other way it could strip the threads.... and if you turn it the other way it may not be tight enough.
Keith
Keith
I personally just used a long section of hose so I could get a gradual bend in it.... I think the PCV valve itself just screws in, but if you tighten it too much trying to face it the other way it could strip the threads.... and if you turn it the other way it may not be tight enough.
Keith
Keith
Thread
Thread Starter
Forum
Replies
Last Post
Tougefreak
Evo Engine / Turbo / Drivetrain
2
May 25, 2017 06:20 PM
jason42003
Evo Engine / Turbo / Drivetrain
2
Dec 18, 2014 03:51 PM
BluEVOIX
Evo Engine / Turbo / Drivetrain
7
Apr 3, 2007 11:52 PM