Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

boost level questions need help...

Thread Tools
 
Search this Thread
 
Old Jan 26, 2007 | 12:31 PM
  #1  
evobeatsti's Avatar
Thread Starter
Evolved Member
iTrader: (7)
 
Joined: Jul 2006
Posts: 1,117
Likes: 1
From: Los Angeles, CA
boost level questions need help...

alright i am getting my car tuned in the upcoming weeks and have a few questions on boost levels so that i can order my final parts. i am planning on having a pump gas map made for boost at like 20 psi and having another map made for high octane unleaded gas i am thinking for sunoco 108 or something.. what is the safest boost levels i can run on like a mix of 1 gallon pump and 5 gallons of 108? if it is less than 25psi then i will stick with a jdm mr diverter valve, but if you think i will be running higher boost levels i might need to get like a forge diverter valve... thanks guys
Reply
Old Jan 26, 2007 | 12:58 PM
  #2  
Warrtalon's Avatar
Evolved Member
iTrader: (6)
 
Joined: Jun 2004
Posts: 20,790
Likes: 2
From: Long Island, NY
Do 21psi on your daily 91oct tune, and go as high as you want for race gas. Whether it's a 5:1 ratio of 108/91, or straight 108, you can run as much boost as you want if you get custom tuned for it. Unless you plan to run the race gas map a lot, a JDM MR DV should be fine. If you do get a Forge, get the Forge RS for 25+, not the regular Evo15.
Reply
Old Jan 26, 2007 | 01:42 PM
  #3  
evobeatsti's Avatar
Thread Starter
Evolved Member
iTrader: (7)
 
Joined: Jul 2006
Posts: 1,117
Likes: 1
From: Los Angeles, CA
thanks for the help warrtalon i would think that the jdm mr would be fine for my autox needs dont you?
Reply
Old Jan 26, 2007 | 01:51 PM
  #4  
Warrtalon's Avatar
Evolved Member
iTrader: (6)
 
Joined: Jun 2004
Posts: 20,790
Likes: 2
From: Long Island, NY
Certainly.
Reply




All times are GMT -7. The time now is 08:47 PM.