so i got this pic right here

i wanna see the other side what shape are the pins??? can i use those baby blue female plug crimps to plug into these pins?

also... is the black and white thick wires the ground and power respectively?

 

:[ no one knows?

 

What is it that you are doing? Is the thick white wire damaged near the top? Or is that just the pic?

 

The white wire is the power wire for the pump. The 2 small gauge black wires are the wires for the float valve.
Also you cannot plug anything into the otherside of the plug. The T-taps that were provided is big enough to tap those wires, but since you are running the baller supra pumps you have to run a relay since those pumps draw a crap load of amps. Give me a call if youve got questions bud

 

not my pic so i don't know if there's damage on that wire but i did notice that.

 

That is a pic from my car. During the R&D of the billet pump assemblys, i had to test and identify wires that is why that looks damaged but its not.

 

so even if only run one pump i still have to use the relay? if so i need one :\

 

no one wanted to gimme the answer so i had to find it in a buschur pic

as you can see the fuel pump PLUG TAKES pins... it has sockets inside.