Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

50 trim dynoed evo 8

Thread Tools
 
Search this Thread
 
Old Mar 24, 2008 | 10:22 AM
  #1  
reddog51's Avatar
Thread Starter
Newbie
 
Joined: Jul 2007
Posts: 10
Likes: 0
From: wilmington
50 trim dynoed evo 8

I own a evo 8 and i just got done getting tuned at atlantic motor sports( amstuning.com) and put down 469whp and 440tq. Im really happy with the tune and would def. recommend others to get tuned by them.

Mods:
turbo trix 50 trim kit
ets piping and intercooler kit with small battery
ams intake manifold
hks 280 cams with greddy timing belt and hks cam gears set at 0,0
exedy twin disc
snow performance alky kit
arp head studs
type s blow off valve
stock motor
stock trans
stage 2 shep transfer case
bushur turbo back exhaust
k&n intake
walbro fuel pump
profec b boost controller


I will get dyno graphs up soon and try to get video too. Just wanted to say thanks to atlantic motor sports. Dyno was done at whatever the turbo could give
which was about 30psi.
Reply
Old Mar 24, 2008 | 11:19 AM
  #2  
el brusco's Avatar
Newbie
 
Joined: Feb 2007
Posts: 69
Likes: 0
From: MA
can't wait to see when does it spool, nice numbers...
any pump gas tune?
Reply
Old Mar 24, 2008 | 11:33 AM
  #3  
SickSilverNLow's Avatar
Evolved Member
iTrader: (5)
 
Joined: Nov 2006
Posts: 4,267
Likes: 0
From: OREGON
nice #s. +1 on pump gas #s.
Reply
Old Mar 24, 2008 | 11:34 AM
  #4  
Mellon Racing's Avatar
Account Disabled
iTrader: (38)
 
Joined: Aug 2005
Posts: 9,319
Likes: 1
From: Virginia Beach, Virginia
nice
Reply
Old Mar 24, 2008 | 12:02 PM
  #5  
reddog51's Avatar
Thread Starter
Newbie
 
Joined: Jul 2007
Posts: 10
Likes: 0
From: wilmington
I didnt get a pump gas tune. I was tuned on a 50/50 mix of water and denatured
alcohol. They said it was easier to keep it like that and just keep alcohol in it. I can pick it up anywhere from any hardware store so its not that bad. i have a full boost at a little before five I think. I will have to look at the sheet again when I get home.
Reply
Old Mar 24, 2008 | 12:14 PM
  #6  
EvoTech's Avatar
Evolved Member
iTrader: (25)
 
Joined: Feb 2004
Posts: 1,424
Likes: 1
From: Long Island
Nice. I had my 50 trim tune a stone's thow away at Turbo XS. Similiar numbers but 500WHP on c16. Nice turbo right? I am loving it.
Reply
Old Mar 24, 2008 | 12:18 PM
  #7  
scorke's Avatar
Evolved Member
iTrader: (18)
 
Joined: May 2003
Posts: 5,192
Likes: 0
From: Nj
It's funny how little the difference between a 50 trim on pump and race gas/meth is.

Nice numbers.

Scorke
Reply
Old Mar 24, 2008 | 12:20 PM
  #8  
Mellon Racing's Avatar
Account Disabled
iTrader: (38)
 
Joined: Aug 2005
Posts: 9,319
Likes: 1
From: Virginia Beach, Virginia
got a dyno chart pic to add to your thread?
Reply
Old Mar 24, 2008 | 12:45 PM
  #9  
Shacochis06's Avatar
Account Disabled
 
Joined: Aug 2007
Posts: 1,206
Likes: 0
From: Bel Air, MD
dam didnt know ams could still squeeze these numbers out...i guess dan is pretty good
Reply
Old Mar 24, 2008 | 12:51 PM
  #10  
reddog51's Avatar
Thread Starter
Newbie
 
Joined: Jul 2007
Posts: 10
Likes: 0
From: wilmington
i love how quick and hard that turbo hit and it has such a great power band with a stock motor. Me and my friend kinda ran and he has the bushur 35r kit and made 511 and we were pretty much dead even the whole time. ill post a dyno sheet when i get home.
Reply
Old Mar 24, 2008 | 03:12 PM
  #11  
ExViTermini's Avatar
Evolved Member
iTrader: (25)
 
Joined: Jan 2005
Posts: 1,761
Likes: 13
From: Virginia
Originally Posted by scorke
It's funny how little the difference between a 50 trim on pump and race gas/meth is.

Nice numbers.

Scorke

yeah, your right, its only about 80-100 ft lbs. Thats chump change.
Reply
Old Mar 30, 2008 | 11:19 AM
  #12  
cij911's Avatar
Evolved Member
iTrader: (14)
 
Joined: Aug 2005
Posts: 2,636
Likes: 1
From: Socal :)
Please post your dyno graph....Hopefully you logged boost and AFR as well...
Reply
Old Mar 30, 2008 | 12:43 PM
  #13  
scorke's Avatar
Evolved Member
iTrader: (18)
 
Joined: May 2003
Posts: 5,192
Likes: 0
From: Nj
Originally Posted by ExViTermini
yeah, your right, its only about 80-100 ft lbs. Thats chump change.
Why didnt you put a 50 trim back on there then ?

50 Trims only make like another 50-80 whp from 93 to 116, thats pretty weak imho.

My 30R did the same, but gained way more tq.

Scorke
Reply
Old Mar 30, 2008 | 06:04 PM
  #14  
ExViTermini's Avatar
Evolved Member
iTrader: (25)
 
Joined: Jan 2005
Posts: 1,761
Likes: 13
From: Virginia
Originally Posted by scorke
Why didnt you put a 50 trim back on there then ?

50 Trims only make like another 50-80 whp from 93 to 116, thats pretty weak imho.

My 30R did the same, but gained way more tq.

Scorke
Didn't put one back on because I knew I was going to shoot for 600, no since in buying two turbo's to do it, even though I did anyway, lol.

The 50's do only pick up about 60whp, but they do gain about 80-100 tq. Not too bad. The 3076 spools fairly nice as well, but after looking at some dyno graphs, I'd just assume have a good 35 at that point.
Reply
Old Mar 30, 2008 | 08:37 PM
  #15  
cij911's Avatar
Evolved Member
iTrader: (14)
 
Joined: Aug 2005
Posts: 2,636
Likes: 1
From: Socal :)
Guys I know there are a ton of people running the 50 trims....I just can't seem to find a good dyno chart....if either of you have a dyno sheet for your 50 trim setups, then please post...
Reply



All times are GMT -7. The time now is 07:23 AM.