Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

Hi everyone, first post.....radiator help!

Thread Tools
 
Search this Thread
 
Old Oct 2, 2008 | 02:46 PM
  #1  
DFelton's Avatar
Thread Starter
Evolving Member
iTrader: (4)
 
Joined: May 2008
Posts: 137
Likes: 2
From: Boston MA
Hi everyone, first post.....radiator help!

Hey all,

I just bought damstr's evo 9 mr from MD and got it shipped up yesterday. Funny thing is the damn truck that shipped it broke down in front of my house, bwahaha. At least my new baby is here, but with a couple problems.

1.) The engine bay smells of coolant and there is a small amount missing from the resevoir, but the radiator is full with NO CLEAR SIGNS OF LEAKAGE. I've run the car and the smell gets worse but I don't actually see anything but a tiny amount on this hose *see pic*. WTF is that metal line with the nut on it? ? It isn't in the cooling system diagram I found online. I'll pressure test the system when I get a chance. I searched past postings but nothing was similar.

2.) Passenger side rear suspension (megan coilovers) clunk. WTF is that all about. Pillow ball mount?

I can't use my normal ramps to get this in the air to look underneath because its so damn low. What does everyone do to jack it up? Small jackstands?..

Thanks in advance!
Attached Thumbnails Hi everyone, first post.....radiator help!-leak2.jpg  
Reply
Old Oct 2, 2008 | 03:54 PM
  #2  
EpicEVO's Avatar
Former Sponsor
 
Joined: Apr 2008
Posts: 254
Likes: 0
From: Parker, CO
The metal line with the nut on it is your AC line.. That shouldn't have anything to do with it smelling..
Reply
Old Oct 2, 2008 | 04:15 PM
  #3  
DFelton's Avatar
Thread Starter
Evolving Member
iTrader: (4)
 
Joined: May 2008
Posts: 137
Likes: 2
From: Boston MA
Great, retard question number one, check.

But there is just a slight film of coolant on that line. Anyone know where it could come from?
Reply
Old Oct 2, 2008 | 04:16 PM
  #4  
DynoFlash's Avatar
Account Disabled
iTrader: (91)
 
Joined: Sep 2003
Posts: 16,850
Likes: 0
From: 2003 Evo VIII - Silver
Originally Posted by DFelton
Hey all,

I just bought damstr's evo 9 mr from MD and got it shipped up yesterday. Funny thing is the damn truck that shipped it broke down in front of my house, bwahaha. At least my new baby is here, but with a couple problems.

1.) The engine bay smells of coolant and there is a small amount missing from the resevoir, but the radiator is full with NO CLEAR SIGNS OF LEAKAGE. I've run the car and the smell gets worse but I don't actually see anything but a tiny amount on this hose *see pic*. WTF is that metal line with the nut on it? ? It isn't in the cooling system diagram I found online. I'll pressure test the system when I get a chance. I searched past postings but nothing was similar.

2.) Passenger side rear suspension (megan coilovers) clunk. WTF is that all about. Pillow ball mount?

I can't use my normal ramps to get this in the air to look underneath because its so damn low. What does everyone do to jack it up? Small jackstands?..

Thanks in advance!
I would suggest clean the engine bay and then keep an eye out for leaks and or coolant comsumption when you drive the car or pushing of coolant into the overflow tank under boost

Al
Reply
Old Oct 2, 2008 | 04:19 PM
  #5  
Q@EvoPowerMods's Avatar
Former Sponsor
iTrader: (23)
 
Joined: Jan 2007
Posts: 812
Likes: 0
From: In the Shop in Alabama
Maybe where the plastic upper part of the radiator is pinched into the inner core has somehow come loose. Only a pressure test will reveal. You could start it up and see if the leak is seeping from that corner area. If it's a tiny amount you should be ok for now, but check it out with the pressure test...hope you find out what it is...
Reply
Old Oct 2, 2008 | 06:55 PM
  #6  
DFelton's Avatar
Thread Starter
Evolving Member
iTrader: (4)
 
Joined: May 2008
Posts: 137
Likes: 2
From: Boston MA
Thanks Al, I've been a big fan over the years and I'm planning on making an appointment in the next few months. I'm up in Mass, so I'll be sure to come down for a nice dyno tune.
Reply
Old Oct 2, 2008 | 06:56 PM
  #7  
DFelton's Avatar
Thread Starter
Evolving Member
iTrader: (4)
 
Joined: May 2008
Posts: 137
Likes: 2
From: Boston MA
Thanks for everyones input!
Reply
Old Oct 3, 2008 | 10:44 AM
  #8  
srajeremy's Avatar
Evolving Member
iTrader: (5)
 
Joined: Mar 2008
Posts: 121
Likes: 0
From: reno, nv
Originally Posted by DFelton
Hey all,

I just bought damstr's evo 9 mr from MD and got it shipped up yesterday. Funny thing is the damn truck that shipped it broke down in front of my house, bwahaha. At least my new baby is here, but with a couple problems.

1.) The engine bay smells of coolant and there is a small amount missing from the resevoir, but the radiator is full with NO CLEAR SIGNS OF LEAKAGE. I've run the car and the smell gets worse but I don't actually see anything but a tiny amount on this hose *see pic*. WTF is that metal line with the nut on it? ? It isn't in the cooling system diagram I found online. I'll pressure test the system when I get a chance. I searched past postings but nothing was similar.

2.) Passenger side rear suspension (megan coilovers) clunk. WTF is that all about. Pillow ball mount?

I can't use my normal ramps to get this in the air to look underneath because its so damn low. What does everyone do to jack it up? Small jackstands?..

Thanks in advance!
maybe there was some spilled in the engine bay manifold etc and some got on the line if some got on the manifold that would explain why the smell gets worse. if youre worried pressure test.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Kkamshi
Evo General
0
Aug 18, 2013 08:03 PM
Spoolin4g63
Evo General
42
Jan 11, 2012 10:53 AM
Evo8*
Evo General
0
Dec 20, 2011 03:46 PM
smokedmustang
Evo Engine / Turbo / Drivetrain
23
May 9, 2006 09:40 AM




All times are GMT -7. The time now is 04:38 AM.