Double pumper and fuel pressure

Reply Subscribe

Thread Tools

Search this Thread

Aug 31, 2010 | 09:36 AM

#16

High_PSI

Evolved Member

iTrader: (50)

Joined: Apr 2006

Posts: 4,152

Likes: 17

From what I understand the Buschur unit is just plug and play and works perfectly.

Aug 31, 2010 | 10:19 AM

#17

Spec-Ops1

Account Disabled

iTrader: (38)

Joined: Jun 2010

Posts: 1,229

Likes: 1

From: Fayetteville,NC

Quote:

Originally Posted by Fast_Freddie

Unless you are running both pumps at idle without drilling out the siphon, then it will overrun the FPR.

This should say will not overrun the FPR.

Aug 31, 2010 | 10:49 AM

#18

05blue8

Thread Starter

Evolved Member

iTrader: (28)

Joined: Mar 2007

Posts: 843

Likes: 5

From: Austin, TX

Right, the Buschur unit comes with the hobbs activation switch prewired so all you have to do is hook it to pump 2, hook it to battery, and hook into a vac line. This switch can also be purchased separately by calling Buschur which is ultimately a better idea in my opinion than trying to mess with all the relays.

Aug 31, 2010 | 10:57 AM

#19

High_PSI

Evolved Member

iTrader: (50)

Joined: Apr 2006

Posts: 4,152

Likes: 17

Great, would this benefit from a hard wire?

Aug 31, 2010 | 01:35 PM

#20

s.e.a.n.

Evolved Member

iTrader: (10)

Joined: Dec 2008

Posts: 1,293

Likes: 9

From: Miami

Quote:

Originally Posted by EmeryatSTM

On 1000cc injectors you will run out of fuel with a single pump at about 490 whp at 8k on our mustang dyno. The double pumper will get you to about 550 whp with that setup on our dyno.

-Em

That also depends on the fuel you're running