Hey Guys I bought a set of supertech valve seals only to find out that he head that I pt them on was cracked. The head was used on the car for 4 days. Is It possible to reuse these seals on another head? usually I would buy a new set but have none available locally and need to get the car back up

 

Anyone?

 

Taking them off will more than likely ruin them. they are cheap though so I would just buy another set. cheap insurance.

We sell them here.

http://www.streettunedmotorsports.co...stem_seals.htm

Also, Pay attention to if you are using dual or single springs. The seals are different for both applications.

-Em

 

Has anyone did this before?

 

i was in the same situation. I bought new seals, don't cheap out on .70 seals lol

 

I got mine directly from supertech cheap

 

Yes if there were available here for sure I would buy them new. I am in the Caribbean!

 

call them and have them send them to you. I am in Massachusetts and supertech is in California.

 

i have ferrea valve seals, new. will sell um if your looking for a set

 

i have brand new supertechs valve seals up for sale

 

Or if you want to reuse them just go ahead and run the cracked head as well, couldn't be any worse right?

 

+1

 

http://www.nolimitmotorsport.com/prod/VS-H6-6E

 

Found an OEM set from the Hyudai Dealers locally so im all set. Exactly the same seals as the 4g63 from their Sonata 2L motor.