Is my boost controller setting correct (Pro-Fec B II)?
Thread Starter
Evolved Member
Joined: Aug 2010
Posts: 1,426
Likes: 2
From: The Universe
Is my boost controller setting correct (Pro-Fec B II)?
Hi Guys,
can anyone share what is an ideal setting on my pro-fec b II boost controller for 1.4 bar?
My current setting : 1.4 Bar
1) Set = 35%
2) Start Boost = 1.20%
3) Limiter = 1.40%
Hope to get better spooling by getting an optimun setting.
Please kindly comment.
Thanks
can anyone share what is an ideal setting on my pro-fec b II boost controller for 1.4 bar?
My current setting : 1.4 Bar
1) Set = 35%
2) Start Boost = 1.20%
3) Limiter = 1.40%
Hope to get better spooling by getting an optimun setting.
Please kindly comment.
Thanks
when i use to run it i always asked the same question and always got the same answer.
there are no ideal settings to run. just have to keep doing pulls and tweaking it until its just right.
unless someone with more experience can chime in and give you pointers, my advice is to just keep messing with it
there are no ideal settings to run. just have to keep doing pulls and tweaking it until its just right.
unless someone with more experience can chime in and give you pointers, my advice is to just keep messing with it
Just SEARCH this forum for the thread on HOW TO TUNE YOUR GREDDY Profec-B or whatever and you will find a step-by-step guide on how to set it up correctly. It's quite easy once you grasp what the different settings mean and what exactly they do.
Thread
Thread Starter
Forum
Replies
Last Post
jameswwt
Evo Engine / Turbo / Drivetrain
6
Oct 12, 2010 07:11 PM
PocketAces
Private 'Evo 1 - 9' For Sale / Wanted
2
Oct 31, 2004 11:16 AM
