FP Red with Garrett Housings ?
Thread Starter
Newbie
Joined: Nov 2010
Posts: 23
Likes: 0
From: Mct
FP Red with Garrett Housings ?
Hi,
Just need to know if its possible to swap them by any T3 Garrett turbine housing? In other words FP Red with T3 A/R .82 3" V band housing !
As I was told that the Red's "CHRA" is almost comparable to Garrett GT3076, so would it work with a GT3076 T3 housing?
Cheers
Just need to know if its possible to swap them by any T3 Garrett turbine housing? In other words FP Red with T3 A/R .82 3" V band housing !
As I was told that the Red's "CHRA" is almost comparable to Garrett GT3076, so would it work with a GT3076 T3 housing?
Cheers
Thread Starter
Newbie
Joined: Nov 2010
Posts: 23
Likes: 0
From: Mct
I knew someone will post something like this ! Anyway.
It's only because I have just received a used one, and the possibility of this swap came up.
And pls nobody posts .. (Why not sell it to me !! ) LooL
Last edited by sound77; Jun 23, 2011 at 07:37 AM.
It will not work. 2 reasons
The FP Red is reverse rotation, while their are reverse rotation garret housings out there, I don't think any of them are T3 inlet flange.
The FP Red uses the Mitsu center housing which has a v-band turbine housing attachment where the Garrett has 6 bolts and some flanges to hold the housing to the CHRA.
The FP Red is reverse rotation, while their are reverse rotation garret housings out there, I don't think any of them are T3 inlet flange.
The FP Red uses the Mitsu center housing which has a v-band turbine housing attachment where the Garrett has 6 bolts and some flanges to hold the housing to the CHRA.
Thread
Thread Starter
Forum
Replies
Last Post
sLowEvX
Evo X Engine / Turbo / Drivetrain
10
Jul 27, 2011 06:37 AM
ETS Michael
Vendor Announcements
8
Jan 19, 2010 05:38 PM
Chris@nolimitmotors
EvoX 'For Sale' External Engine / Power
23
Oct 19, 2009 02:56 PM
