EvolutionM - Mitsubishi Lancer and Lancer Evolution Community

Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

HKS 4.11: what do I need to make it work?

Thread Tools
 
Search this Thread
 
Old Sep 11, 2011 | 05:48 PM
Share
  #1  
lillev23's Avatar
lillev23
Thread Starter
Evolved Member
iTrader: (34)
 
Joined: Aug 2006
Posts: 1,042
Likes: 0
From: Georgia
HKS 4.11: what do I need to make it work?
Is there anything that needs to be changed to make the 4.11 work with an Evo VIII trans with a IX 1st? Thanks in advance.

William
Reply
0
Old Sep 11, 2011 | 06:34 PM
Share
  #2  
RyuEvoIX's Avatar
RyuEvoIX
Evolved Member
15 Year Member
iTrader: (10)
 
Joined: May 2007
Posts: 2,126
Likes: 1
From: Florida
All you need is the final drive.
Reply
0
Old Sep 11, 2011 | 06:54 PM
Share
  #3  
RSMike's Avatar
RSMike
EvoM Guru
Photogenic
Photoriffic
Shutterbug
iTrader: (1)
 
Joined: Jul 2009
Posts: 2,276
Likes: 372
From: New Zealand
new bearings for that shaft wouldn't hurt either.
and any other consumables when putting a gearbox back together
Reply
0
Old Sep 11, 2011 | 07:02 PM
Share
  #4  
lillev23's Avatar
lillev23
Thread Starter
Evolved Member
iTrader: (34)
 
Joined: Aug 2006
Posts: 1,042
Likes: 0
From: Georgia
Well I just put new bearings, sliders, synchros, and synchro springs in it about 800 miles ago, so I I'm pretty sure all that stuff is good.
Reply
0
Back to Subforum
Evo Engine / Turbo / Drivetrain
View Next Unread
Spun bearing?




Advanced Search

All times are GMT -7. The time now is 08:55 PM.