New CBRD LMP V-band kit--
Thread Starter
Account Disabled
iTrader: (60)
Joined: Dec 2004
Posts: 7,363
Likes: 8
From: york, pa 17402
New CBRD LMP V-band kit--
We have a car that was shipped to us from TN to do a 2.3 L longblock build-
the car was originally running a BBK full and had an overboost issue which punched a nice hole in the block-
so while we were doing the build- we decided to build our own new Tial Housing kit- sure there are a few out there- and we love the kits that JMF has done for us- but this one was done entirely in house at CBRD- utlizing SS tube instead of pipe- requiring it to be braced to the block (like our F1 manifold setup)
Details/Numbers/availability shortly-
This will be run on a Manley 100mm Crank 2.3 with Carillo/CP combo and built head- with s2 cams- and the new 35RB Turbocharger built by Blouch turbo for us-
If this is anything like the other kits we have been doing- then Im sure everyone will be pleased....
Key points-
fully ported stepped Flange (machined for us by JMF)
CBRD built collector
CBRD built manifold
CBRD O2 housing with Flex bellow and Vbanded Downpipe
Everything will be Swain Tech white lightning coated..
so pics of that too shortly!!
Cheers
CB
the car was originally running a BBK full and had an overboost issue which punched a nice hole in the block-
so while we were doing the build- we decided to build our own new Tial Housing kit- sure there are a few out there- and we love the kits that JMF has done for us- but this one was done entirely in house at CBRD- utlizing SS tube instead of pipe- requiring it to be braced to the block (like our F1 manifold setup)
Details/Numbers/availability shortly-
This will be run on a Manley 100mm Crank 2.3 with Carillo/CP combo and built head- with s2 cams- and the new 35RB Turbocharger built by Blouch turbo for us-
If this is anything like the other kits we have been doing- then Im sure everyone will be pleased....
Key points-
fully ported stepped Flange (machined for us by JMF)
CBRD built collector
CBRD built manifold
CBRD O2 housing with Flex bellow and Vbanded Downpipe
Everything will be Swain Tech white lightning coated..
so pics of that too shortly!!
Cheers
CB
Thread Starter
Account Disabled
iTrader: (60)
Joined: Dec 2004
Posts: 7,363
Likes: 8
From: york, pa 17402
thanks Grant-
there is more clearance with this kit than any other we've used-
alot of time was taken for the turbo placement-
we can run through 30RB up to a 37RB-
big power!
cb
there is more clearance with this kit than any other we've used-
alot of time was taken for the turbo placement-
we can run through 30RB up to a 37RB-
big power!
cb
Trending Topics
That is a nice setup and I like the merge into the DP. It looks like the head flange has a longer transition from oval to round, which is good. Can't wait to see the results.
