My English Racing LR2.4 Build Begins
#1
Newbie
Thread Starter
Join Date: Nov 2009
Location: Plano, TX
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
My English Racing LR2.4 Build Begins
Hey all,
I've been lurking around for a few years and I have finally given in and began a build on my blue evo IX. Up until now I have been running a buschur 3" TBE, Megan O2, and GSC S1s.
So an update to my build. Because of time constraints at work, I was unable to complete my build on my own. With this in mind, I employed the help of Kevin and crew at Evodynamics to perform the install and the tune. The following parts are what I chose to go with.
English Racing 2.4LR 10:1 CR
English Racing Ported Head
Kiggly HLA
GSC S3
MAP Rev3 Intake
MAP 75mm Throttle
ETS FF HTA86
ETS 4" Intercooler
ETS 3" Upper Intercooler Pipe
ETS Small Battery Kit
Buschur Racing COP
Buschur Racing Small Radiator
Buschur Racing Double Pumper
Buschur Racing 3" Exhaust
Buschur Racing Stainless Brake Lines
Buschur Racing Catch Can
Exedy Clutch
Baer Eradispeed Rotors
Hawk Pads
RPF1s w/Hankook R-S3 255/40/17
and a few other small things.
I will be running speed density and shooting for 700+whp...
The car.
The first of my goodies.
The engine
The trunk filled with goodies...
Engine and turbo kit in
Top view of the kit
Brakes
Piping and other parts installed
Any advice as my build proceeds will be appreciated!
Wes
I've been lurking around for a few years and I have finally given in and began a build on my blue evo IX. Up until now I have been running a buschur 3" TBE, Megan O2, and GSC S1s.
So an update to my build. Because of time constraints at work, I was unable to complete my build on my own. With this in mind, I employed the help of Kevin and crew at Evodynamics to perform the install and the tune. The following parts are what I chose to go with.
English Racing 2.4LR 10:1 CR
English Racing Ported Head
Kiggly HLA
GSC S3
MAP Rev3 Intake
MAP 75mm Throttle
ETS FF HTA86
ETS 4" Intercooler
ETS 3" Upper Intercooler Pipe
ETS Small Battery Kit
Buschur Racing COP
Buschur Racing Small Radiator
Buschur Racing Double Pumper
Buschur Racing 3" Exhaust
Buschur Racing Stainless Brake Lines
Buschur Racing Catch Can
Exedy Clutch
Baer Eradispeed Rotors
Hawk Pads
RPF1s w/Hankook R-S3 255/40/17
and a few other small things.
I will be running speed density and shooting for 700+whp...
The car.
The first of my goodies.
The engine
The trunk filled with goodies...
Engine and turbo kit in
Top view of the kit
Brakes
Piping and other parts installed
Any advice as my build proceeds will be appreciated!
Wes
Last edited by Grinder31; Aug 3, 2012 at 06:37 PM.
Trending Topics
#11
Newbie
Thread Starter
Join Date: Nov 2009
Location: Plano, TX
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
Wes
#13
Newbie
Thread Starter
Join Date: Nov 2009
Location: Plano, TX
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
Finally got organized. Looks like I'm going to need a bigger rack. I am also looking at buying a 2-level stainless cart. I think that should help me out with the remove and replace operations in the near future...
#15
Newbie
Thread Starter
Join Date: Nov 2009
Location: Plano, TX
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
I need to have 2 of 4 of the emissions items installed in my car to pass dallas' car inspection. I neglected to notice that my throttle body doesn't have a egr provision so i'm going to have to figure that one out. I'll probably wind up with the Magnus if I don't hit the numbers I want and figure out another way around the inspection...