just wondering if anyone has dyno results or any info as to how these cams stand up to one another.i seen the ams cam test but nothing on m2s.the reason is i was going for the kelfords but i ran across a set of m2s for 320 bucks so i picked them up. deciding on if i want to run them or get the kelfords. another question is how much power bolton would i get from these. i went 12.14@112 last weekend and was wanting to get into the 11s before i got a tune,would these help.

 

Question #1... What size turbo are you running?

Answer #2... Read this article... I would recommend the Kelfords

https://www.evolutionm.net/forums/ev...sworth-m2.html

Hopefully this answers your questions!

 

Yes I've read through that thread also.didn't really help.I am running stock 9 turbo

 

The lift and duration of each of the cams are similar although from AMS tests back when they still claim the kelfords make more power overall!

 

yes i know that they should be close to kelfords at max hp.the both have 11mm max lift. i was mainly worried about the spool up and mid range powered compared.thanks

 

those are all really good questions

 

FWIW, when Buschur built my car, the M2's that were in it before the build stayed and it made 711whp on their mustang dyno when all was said and done.

 

^^ they recommended the m2's to me and i made good power with them!