Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

Few problems on Evo 9..New to the community

Thread Tools
 
Search this Thread
 
Old Mar 8, 2018, 06:38 PM
  #1  
Newbie
Thread Starter
 
Xeroff's Avatar
 
Join Date: Mar 2018
Location: newport beach
Posts: 28
Received 0 Likes on 0 Posts
Few problems on Evo 9..New to the community

Sometimes I would miss a gear and over rev the engine and a slight burning smell would appear is that normal? Also, the oil temperature gauge goes all the way up the 300F (Max) every time i start it up is this just a wiring problem? If anyone is around Orange County area are there any good detailers?? Big thanks my dudes!!
Old Mar 8, 2018, 07:29 PM
  #2  
Evolved Member
iTrader: (1)
 
2006EvoIXer's Avatar
 
Join Date: Jul 2012
Location: California
Posts: 3,294
Received 194 Likes on 182 Posts
Does your oil temp gauge go to max if you just turn on (without starting) your engine? If it does the same thing, then that's part of it's display during startup. I've never mis shifted so I don't know about oil smell but you run into real potential for valve float. How many times have you done this? It sounds like you do this often
Old Mar 9, 2018, 01:53 PM
  #3  
Newbie
Thread Starter
 
Xeroff's Avatar
 
Join Date: Mar 2018
Location: newport beach
Posts: 28
Received 0 Likes on 0 Posts
I am used to the Evo shifting feel now so I haven't missed shift since so that smell never hit me again but the oil temperature gauge only goes up all the way after I start the car (even when its a cold start). Also another question i have is that sometimes after i hit boost and shift to neutral the rpm drops below 1000 and comes back up and sometimes it does that repeatedly is that a serious thing or just evo things.
Old Mar 9, 2018, 02:22 PM
  #4  
Newbie
 
Rasta's Avatar
 
Join Date: Jan 2018
Location: Morristown, NJ
Posts: 9
Received 1 Like on 1 Post
Is this your first manual trans car?
Old Mar 9, 2018, 02:40 PM
  #5  
Newbie
 
frsh92laser's Avatar
 
Join Date: Oct 2010
Location: siny
Posts: 85
Received 20 Likes on 18 Posts
You may be able to achieve better shifting if you remove the restrictor pill from the clutch slave cylinder, this is supposed to result in a more consistent clutch release.
Old Mar 9, 2018, 04:12 PM
  #6  
Evolved Member
iTrader: (1)
 
2006EvoIXer's Avatar
 
Join Date: Jul 2012
Location: California
Posts: 3,294
Received 194 Likes on 182 Posts
Originally Posted by Xeroff
I am used to the Evo shifting feel now so I haven't missed shift since so that smell never hit me again but the oil temperature gauge only goes up all the way after I start the car (even when its a cold start). Also another question i have is that sometimes after i hit boost and shift to neutral the rpm drops below 1000 and comes back up and sometimes it does that repeatedly is that a serious thing or just evo things.
In neutral, engine stumbling under 1000 rpm should be normal since ecu is adjusting. As for your oil temp gauge, does it max out every time you start your engine? Even if you turn it off and start 15 seconds later? I think it is part of the boot up display to make it look cool.
Old Mar 9, 2018, 04:54 PM
  #7  
Newbie
Thread Starter
 
Xeroff's Avatar
 
Join Date: Mar 2018
Location: newport beach
Posts: 28
Received 0 Likes on 0 Posts
I drove a 2014 mazda3 manual for 6 months prior to buying the GSR. I am used to it now so now my question is just the rpm dropping to around 700 ish and going up to 1200 repeatedly and my oil temp gauge maxing out LITERALLY every time i start up the car
Old Mar 9, 2018, 05:10 PM
  #8  
Evolved Member
iTrader: (1)
 
2006EvoIXer's Avatar
 
Join Date: Jul 2012
Location: California
Posts: 3,294
Received 194 Likes on 182 Posts
Originally Posted by Xeroff
I drove a 2014 mazda3 manual for 6 months prior to buying the GSR. I am used to it now so now my question is just the rpm dropping to around 700 ish and going up to 1200 repeatedly and my oil temp gauge maxing out LITERALLY every time i start up the car
Then gauge is only going through its start up cycle. As for RPM, if it keeps going up to 1200 and dropping to 700 constantly, you have something wrong. It shouldn't be that much. My car has S2 cams and it bounces up and down by about 100 RPM at idle.
The following users liked this post:
Xeroff (Mar 9, 2018)
Old Mar 9, 2018, 09:42 PM
  #9  
Newbie
Thread Starter
 
Xeroff's Avatar
 
Join Date: Mar 2018
Location: newport beach
Posts: 28
Received 0 Likes on 0 Posts
I havent had it since and last time i had it the bounce is less severe but i will probably message road race engineering. Thanks for the helps my dude.
Old Mar 10, 2018, 08:48 AM
  #10  
Evolved Member
iTrader: (1)
 
2006EvoIXer's Avatar
 
Join Date: Jul 2012
Location: California
Posts: 3,294
Received 194 Likes on 182 Posts
Originally Posted by Xeroff
I havent had it since and last time i had it the bounce is less severe but i will probably message road race engineering. Thanks for the helps my dude.
Who was your tuner? I had Rick and Sam tune my car and I like Sam better. He explained his tunes and is much more responsive to my questions.
​​​​​
Old Mar 10, 2018, 06:16 PM
  #11  
Newbie
Thread Starter
 
Xeroff's Avatar
 
Join Date: Mar 2018
Location: newport beach
Posts: 28
Received 0 Likes on 0 Posts
Road Race Engineering
Old Mar 10, 2018, 07:46 PM
  #12  
Evolved Member
iTrader: (8)
 
Tuxevo's Avatar
 
Join Date: Aug 2010
Location: Silver Spring, MD
Posts: 569
Received 17 Likes on 14 Posts
The oil temp gauge is an easy fix. There's a break in the circuit that needs to be located and repaired. The idle hunting when you push the clutch in and coast is fixed by properly adjusting your BISS and idle stepper lookup table.
The following users liked this post:
2006EvoIXer (Mar 19, 2018)
Old Mar 19, 2018, 03:49 PM
  #13  
Newbie
Thread Starter
 
Xeroff's Avatar
 
Join Date: Mar 2018
Location: newport beach
Posts: 28
Received 0 Likes on 0 Posts
My ac sucks at cooling its basically blowing the same temperature as outside air but heating works just fine. Anyone know if this is just an evo problem or my car?
Old Mar 19, 2018, 04:01 PM
  #14  
Evolved Member
iTrader: (1)
 
2006EvoIXer's Avatar
 
Join Date: Jul 2012
Location: California
Posts: 3,294
Received 194 Likes on 182 Posts
Originally Posted by Xeroff
My ac sucks at cooling its basically blowing the same temperature as outside air but heating works just fine. Anyone know if this is just an evo problem or my car?
You're probably low on freon. Every car has this problem sooner or later.

Last edited by 2006EvoIXer; Mar 19, 2018 at 04:07 PM.
Old Mar 19, 2018, 04:08 PM
  #15  
Evolved Member
iTrader: (1)
 
2006EvoIXer's Avatar
 
Join Date: Jul 2012
Location: California
Posts: 3,294
Received 194 Likes on 182 Posts
Did you fix your original issues following Tuxevo advice?


Quick Reply: Few problems on Evo 9..New to the community



All times are GMT -7. The time now is 09:30 AM.