When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Exhaust camshaft Mr 506 in the middle of the camshaft Exhaust camshaft U stamp after cylinder 3 And ME stamp with a red stripe after cylinder 4 Exhaust camshaft Number 1 stamp after cylinder one valves Exhaust camshaft Intake camshaft Number 2 is stamped after cylinder 1 Z stamp after cylinder 3 and ME stamp after cylinder 4 Intake camshaft MR 405 on the middle of the camshaft Intake camshaft
@Adamos Adamou Hello. Did some image searching & came up w/nothing. Wonder if measuring the lobes would be good way to determine what the profile is: I.e. 272's, 274's
@Adamos Adamou Hello. Did some image searching & came up w/nothing. Wonder if measuring the lobes would be good way to determine what the profile is: I.e. 272's, 274's
Stock 8 cams may look like this example:
10000% those i have are not stock ones.stock ones have oil holes on them like the ones you post.those ones i have doesnt have anything on them
