475 WHP on dynojet, 10's possible?
 

I was just curious if its possible to hit a 10.60-10.8 1/4 mile time on an EVO making a peak of 475 WHP (and good driving) with a 1.7 60' time???


I plan on keeping my 05 EVO's bottom end stock, and using Turbotrix's T3/T4 Innovative Turbo kit...

No.

No ,maybe 500 on dyno dynamics or mustang.

475WHP on dynojet would get you about 124-125mph in a full weight evo8. Curt Brown went 10.9 with 124mph, but that was with a low 1.5 60'. with a 1.7 and still great shifting (but not Brown shifting), the ET would be in the 11.3-11.4 range.

IMHO you would nee a 1.4 or better to see 10.8 - 10.6 with only 125mph.

your going to need far more power than 475 at the wheels to see 10.6-10.8. If you got a 1.7 short time, a 10.8 ET would be over 130mph. 130mph+ is BIG power.

Thanks for the reply!!

No, 475 won't get you there. 485whp on a dynojet only got IE Evo 11.6 at 122.8 in a full weight Evo. Good luck though...

yes it is possible. an evo 5 of Autoplus hit 10.917 at 480whp, high temp weather condition, and done on a drag "street" (meaning all gravel with no VHT).

was it stripped?

I have 558 awhp on dynojet and run 11.1 at 129mph

wow so close to a 10

that is very, very impressive considering you're still on the stock engine. MAD PROPS, Dave. {thumbup}

thanks guys i do what i can!! it will run 10s when we get some more runs and a front lsd diff....(the stockers break on me). I am also going to keep doing it on pump gas and meth injection ...NO racegas with stock intake manifold and throttle body!

Haha, its fun to see how far the stock components will really go.

yes.....yes it is. sometimes i wonder how long the fun will last....hehe

no it is not. click on the whole link or click on this to see the car

what u see is what it was on the race