Dyno'd my IX GSR
 

I finally got to dyno my IX yesterday at RMS in Hawaii (home of Oahu's ONLY AWD dyno). I'm very happy with my results, as they were exactly what I expected.

On my first run, I hit 306awhp and 304awtq. Come to find out that the line they tapped into to for the MAP sensor popped off, causing a nice boost leak. It came off at 19psi.

On the second run I hit 335/320... at 25psi :eek:! My Autometer was telling me I was boosting at 23psi (what I'm tuned for). I got some knock on that run (logged them all), at on point as high as 8 counts.

Turned down the boost some, and made my final pull... 336/321 at 24.4psi. I only got up to 2 counts of knock on that run. I turned the boost down a tad more but didn't make another pull.

Also, it looks like I got some room to make a bit more power down low... my A/F (which was read at the tailpipe) was 10:1 all the way up to ~5500, after that it was at 11.5:1.

Vid and dyno graph will be posted up as soon as I get a new cable for my camcorder and get the graphs scanned.

your numbers seem they are right where they are supposed to be!

Very nice for a mail-in flash, eh!