The Evolution of a Street Machine- Update 04/25- Car @ home
 

Page 2 major updates for beginning post #26- Tuning results posted



Well, going to be doing a build up of my car starting in the next couple of weeks, stage 1 and 2 will be done. Here's what we got so far, let me know what you think, and I'll continue to update this thread as the parts go on and we test and tune.

Here's what will be going in April 23-25th:
I'll let you guys know the results before and after. Can't wait.

HKS drop in filter
JunB.L. Exhaust w/test pipe
Kartboy Hangers
Perrin 3" down pipe
Perrin FMIC
Nisei full Aluminum polished LICP
Cosworth 272 cams
ARP Head Studs
Walboro Fuel Pump
720cc Denso injectors
Samco Hose kit
Exedy Heavy Duty Twin Plate Clutch/Flywheel Kit EVO
Apex'i AVCr
MAF Relocation
Tial BOV

JunB.L. (Courtesy of Wayne @ PPI)
https://i150.photobucket.com/albums/...BL0004-web.jpg

https://i150.photobucket.com/albums/...BL0002-Web.jpg


Another piece came in today :D

Aluminum Nisei LICP whoo: (EmotionGarage)

https://i150.photobucket.com/albums/...X/Licp0001.jpg


Also, forgot to post these that were already on:

Cusco Rear STB

https://i150.photobucket.com/albums/...uff0001web.jpg

https://i150.photobucket.com/albums/...uff0004web.jpg

and Ingall's Stiffy Torque Dampener (Courtesy of Speed Element)

https://i150.photobucket.com/albums/...uff0005web.jpg

https://i150.photobucket.com/albums/...uff0006web.jpg

https://i150.photobucket.com/albums/...uff0007web.jpg

Not bad, but why are you going with the Tial BOV? Just seems a lil overboard, unless your getting a turbo upgrade soon after...?

Guess i should have put it in the post, but this is mostly prep work for a turbo upgrade. We wanted to get everything ready so that when it comes time to do the turbo, it'll be real simple. I'll be doing some suspension stuff next and driving the car around with it's stage1/2 install for a while until I feel the need for more speed ;p

Most likely will be going with FP Green turbo.

Busy day today.

Stopped at Speed Element for oil change, and to install APR Rear Diffuser and Defi Gauges:

Test fitting Diffuser
http://i150.photobucket.com/albums/s...Diffuser01.jpg

http://i150.photobucket.com/albums/s...Diffuser02.jpg

Diffuser Installed

http://i150.photobucket.com/albums/s...r-diffuser.jpg

http://i150.photobucket.com/albums/s...diffuser02.jpg

and Defi's

http://i150.photobucket.com/albums/s...is-head-on.jpg

http://i150.photobucket.com/albums/s...from-below.jpg

Clean setup bro!

how much where those defi's??

nice setup

$650 for the gauges, relocation kit, panel, and Greddy Oil Block adapter.

One last bit to show before it's installed

http://i150.photobucket.com/albums/s...X/AVCr0001.jpg

http://i150.photobucket.com/albums/s...X/AVCr0002.jpg

Dropped off the car at GST this morning. Will check on it tomorrow and show some pics of it in progress :D

Dyno results to be posted wed night.

Well, stopped by the shop today and snapped a couple of pics of the car in a state of dismemberment. so sad :D


http://i150.photobucket.com/albums/s...GST0004web.jpg

http://i150.photobucket.com/albums/s...GST0006web.jpg

stock cams looks like maybe?

http://i150.photobucket.com/albums/s...GST0005web.jpg

Tomorrow is pickup and tune whooooooooo ;p

i like your exhaust, great sound.

good stuff, you have a nice build going on...

Doh, forgot to post my Baseline dyno from last week, 241whp, 241wtq:

http://i150.photobucket.com/albums/s...241-241-02.jpg

http://i150.photobucket.com/albums/s...241-241-01.jpg

looks good. but some of stuff got to go.

HKS drop in filter - if you going to use this might aswell just don't use a filter. get a K&N
Samco Hose kit - junk
Apex'i AVCr - junk
Tial BOV - over kill

Filter gonna be changed to open element filter (maybe apex'i or BR) when i add FPgreen turbo. AVCr and Tial are in prep for the turbo as well. Also, considering adding meth kit on top of FP atm.