EvolutionM - Mitsubishi Lancer and Lancer Evolution Community

EvolutionM - Mitsubishi Lancer and Lancer Evolution Community (https://www.evolutionm.net/forums/)
-   Evo Engine / Turbo / Drivetrain (https://www.evolutionm.net/forums/evo-engine-turbo-drivetrain-22/)
-   -   Who's Manifold?? (https://www.evolutionm.net/forums/evo-engine-turbo-drivetrain/365565-whos-manifold.html)

Dragking2189 Aug 24, 2008 02:35 PM

Who's Manifold??
 
3 Attachment(s)
I'm About To Buy This Manifold But Before I Do I Want To Know What U Guys Think .... ? Thanks

SpoolnupTuning Aug 24, 2008 02:42 PM

if this is on ebay do not buy it!!! it will crack in less than 2kmiles!!

gsrboi80 Aug 24, 2008 02:45 PM

Looks like the ebay full race knock off to me. ^ Dont listen to him either. There are many many many on here running this manifold on thier budget builds making great power with no cracks.

Misinformation sucks. The only deal is that if something does happen there is noone to stand behind it

V8HAHA Aug 24, 2008 02:50 PM

I have this manifold doing a 35r build and I believe member evolved made 500whp with this mani and a 50trim alot of people will tell you not to use it its going to crack or its a cheap knock off but alot of them are just going off of what the heard and not experienced them self. I have used ebay parts and parts from some of our top vendors and have had failures form both the only difference when an ebay part fails it cost you a few haundred but when some of these top vendors products fail its usually a bit more.

SpoolnupTuning Aug 24, 2008 06:55 PM


Originally Posted by gsrboi80 (Post 6043381)
Looks like the ebay full race knock off to me. ^ Dont listen to him either. There are many many many on here running this manifold on thier budget builds making great power with no cracks.

Misinformation sucks. The only deal is that if something does happen there is noone to stand behind it

Its funny you say that?? Because i know a guy that had one and it cracked in no time so he got with this company (that has been deleted from ebay many times, under different names) and they replace it after 1k miles then it cracked again!! So if your saying it is not going to crack, then buy it and find out for yourself! Im not trying to sell nothing, but only trying to help fellow evo owners and make sure they dont waste their money on trash like this! Sorry if you dont like my post but i do post in complete honesty.

dsm25psi Aug 24, 2008 07:12 PM

https://www.evolutionm.net/forums/sh...highlight=ebay

check out inside of the collector and trust me they all look like that, do u really want to install a $1300 turbo on a manifold that a collectors looks like that , it will kill ur turbo. I had one of these manifolds when they just came out a while ago and as soon as i got it i sent it back because it was bad.

hawaiian_evo Aug 24, 2008 07:20 PM

everyone will have theri own experience like my megan cracked after 2k miles but theres guys out there who are rocking their megan manis way over 2k

basically ask your self how luch you got

nice mani though looks solid

gsrboi80 Aug 24, 2008 07:25 PM

Oh no way will I buy 1. I like my investments to be warrantied. :D but have seen many cases of the Full Race knock off holding up just fine and many guys on here have had sucess with that mani

Dragking2189 Aug 24, 2008 07:45 PM

if u really look at the manifold ... the welds are awsome and i've heard great stories about this manifold and bad stories....people say the megan cracked mt friend had one in his car and never cracked and he used to beat on his car

sikrsix Aug 25, 2008 04:02 AM

You can always reinforce the welds and add some gussets to the "weak" areas for added security.

Geoff Raicer Aug 25, 2008 02:30 PM

its a terrible knockoff of our t3 prostreet manifold. it is made of very low grade stainless steel with awful welds. I expect you will have problems and in the long run will spend more money than you save

JakeTheVIII Aug 25, 2008 02:57 PM


Originally Posted by dsm25psi (Post 6044182)
https://www.evolutionm.net/forums/sh...highlight=ebay

check out inside of the collector and trust me they all look like that, do u really want to install a $1300 turbo on a manifold that a collectors looks like that , it will kill ur turbo. I had one of these manifolds when they just came out a while ago and as soon as i got it i sent it back because it was bad.

Right. I had one of these manifolds and the inside of the collector looks like crap. Bunch of splattering and dingleberries inside that will go straight into your turbo if they get hot enough and shoot out.


All times are GMT -7. The time now is 02:59 AM.


© 2026 MH Sub I, LLC dba Internet Brands